Setting The Signal - Bosch WLK24261BY Instruction Manual And Installation Instructions

M

Setting the signal

i n g S e t t
1. Activate setting mode for the signal volume
turn to Off
2. Set the volume for the button signals (depending on model)
press the button until the required volume is
reached
3. Set the volume for the information signals
rotate it one step to the
right
t h e
hold down + and turn one position to
the right
press the button until the required volume is
reached
s i g n a l
press and hold the button for approx. five
seconds until the display elements light up
Setting mode is activated.
go to set to Off, which exits setting mode for the
point 3. or signal volume
Setting the signal
set to Off, which exits setting
mode for the signal volume
en
23