Table of Contents
Advertisement
Store the screw and sleeve screwed
together.
Take the hoses out of the holders.
1.
Take hoses out of the elbow and
2.
remove elbow.
Unscrew and remove all four
3.
transport brace screws.
Remove the mains cable from the
4.
holders. Remove sleeves.
Insert covers.
5.
Lock the covers firmly in
Note:
place by applying pressure to the
snap-in hooks.
Positioning and connecting
Hose and cable lengths
Connection on left side
or
Right-hand connection
If the hose holders are used, the
Note:
possible hose lengths are reduced!
The following are available from
Tip:
specialist dealers/after-sales service:
Extension for Aqua-Stop or cold
■
water inlet hose (approx. 2.50 m).
Order no. WMZ2380
A longer supply hose (approx. 2.20
■
m) for standard model.
en
35
Advertisement
Table of Contents
