Table of Contents
Advertisement
Classe 300X
Installation Manual
Wi-Fi installation requirements
Check the Wi-Fi signal quality from the device display (see the Installer Manual). If it is low or does
not exist, make sure that:
–
the device is not installed near large metal objects or electric devices that can generate
electromagnetic field;
–
there are fewer possible walls between the router/access point and the Classe 300X.
Note: it is recommended that the Classe 300X is installed near the Wi-Fi router.
Note: it is possible to install just one Classe 300X for each Wi-Fi (SSID) network.
Note: it is possible to install just one Classe 300X for apartment
1
Suggested
Always check the Wi-Fi signal on the device display
before final installation of the objects.
The device has been correctly connected to the Wi-Fi
network and configured in the appropriate section.
The Wi-Fi signal is not sufficient to ensure the
correct call transfer and other smartphone
features.
Check the Wi-Fi installation requirements
– Partition masonry walls
– Wood walls
– Plasterboard walls
– Walls in reinforced concrete
– Load-bearing walls
– Stone walls
– Metal walls
12
1
Advertisement
Table of Contents
