Bticino 344642 User Manual page 107

Hide thumbs Also See for 344642:
Table of Contents

Advertisement

Classe 300X firmware update (only if connected to the same Wi-Fi network of the Classe 300X)
When a new firmware is released you will be sent a notification on your smartphone, or you can update
your Classe 300X firmware at any time by accessing this section.
UPDATING THE VIDEO INTERNAL UNIT
New firmware available
An update is available for your video
internal unit.
The video internal unit will download
the new update..
1
Do you want to proceed?
On entering the section, if an update is available, a key will be displayed to download it, otherwise
the version currently in the Classe 300X appears.
1. Touch to download the update.
2. Touch to install it.
UPDATING THE VIDEO INTERNAL UNIT
Firmware update
Wait for the installation to finish.
Do not switch off/use the video internal unit.
At the end of the installation you can display the firmware version installed in your Classe 300X.
Replacing the Classe 300X
If you need to replace the Classe 300X installed in your system, you must use this procedure.
REPLACE THE VIDEO INTERNAL UNIT
Remove the video internal unit from the
plant and replace it with the new one.
Make sure that the video internal unit and
the smartphone are connected to the same
Wi-Fi network with access to the internet.
On entering the section a warning screen appears.
1. Remove the Classe 300X to be replaced and connect the new one, then press continue.
2. Touch to end the procedure.
Note: this procedure allows you to recover all the settings in the replaced Classe 300X, via the
connection to the WiFi network.
107
UPDATING THE VIDEO INTERNAL UNIT
Downloading firmware
Wait for the download to finish.
Do not switch off/disconnect the video
internal unit.
45%
CONFIGURATION IN PROGRESS
Please wait a few moments for the configu-
ration to be correctly completed
1
Search of the video internal unit
Classe 300X
User manual
UPDATING THE VIDEO INTERNAL UNIT
New firmware downloaded
The update has been downloaded.
During the installation the video
internal unit cannot be used.
Do you want to proceed?
Release notes
UPDATING THE VIDEO INTERNAL UNIT
Firmlware correctly
updated
Il videocitofono è ora aggiornato!
Last check:
2016-02-25 (HH:07:08)
SUCCESS
Connected video internal unit
2
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Classe 300 x13eClasse 300x344643

Table of Contents