Cisco 12006 series Product Overview page 5

Chapter 1 Product Overview
•
•
•
•
•
•
•
•
OL-11497-03
All power modules and other field replaceable units (FRUs), except for the
air blower module and the power distribution unit (PDU), can be removed
from the front of the chassis.
All source power connections are located at the rear of the chassis on the
PDU. (See Figure 1-2.)
Enhanced models have a new stylish front door that hides router cabling. The
door can be installed to open from the right side or left side to give you total
flexibility.
Network Equipment Building Systems—Cisco 12006 and Cisco 12406
routers comply with the Network Equipment Building System (NEBS)
Criteria Level 3 requirements defined in SR-3580 for flammability,
structural, and electronics compliance.
Electromagnetic Compatibility and Electrostatic Discharge Compliant—
Cisco 12006 and Cisco 12406 routers comply with emissions, immunity, and
electrostatic discharge (ESD) standards for both product and packaging.
Bonding and Grounding—Bonding and grounding for safety, circuit
protection, noise currents, reliability, and operations compliance.
Environmental Monitoring—Cisco 12006 and Cisco 12406 router complies
with environmental monitoring standards for operating temperature and
humidity, as well as handling temperature and humidity (except for heat
dissipation).
Shock and Vibration—Cisco 12006 and Cisco 12406 routers have been
shock- and vibration-tested for operating ranges, handling, and earthquake
standards to NEBS (Zone 4 per GR-63-Core). These tests have been
conducted in earthquake environment and criteria, office vibration and
criteria, transportation vibration and criteria, and packaged equipment shock
criteria.
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
Product Description
1-5