Home Connect
en
Status
View the status of your connection to
the home network, to the app and to the
energy manager (depending on the
appliance features).
Ensure that you are in the Home
Connect menu. ~ Page 43
Press Status.
Activating/deactivating Wi-Fi
If your appliance is already connected
to your home network, you can activate
or deactivate Wi-Fi on your appliance.
Ensure that you are in the Home
Connect menu. ~ Page 43
Press Wi-Fi.
Notes
If you connect to your home network,
■
Wi-Fi is activated automatically.
If Wi-Fi is activated on your
■
appliance, the appliance is not
automatically put in standby mode.
If Wi-Fi is switched off on the
■
appliance, it is not possible to use
the Home Connect app to start or
control the appliance remotely.
If Wi-Fi is switched off and your
■
appliance was previously connected
to your home network, this
connection will be re-established
automatically when Wi-Fi is switched
back on.
If you activate this function, the
■
energy consumption increases in
comparison to the values specified
in the consumption value table.
~ Page 72
46
Resetting your network
settings
You can reset all of the network
settings.
Ensure that you are in the Home
Connect menu. ~ Page 43
Press Reset.
1.
Do you want to reset all network
settings? appears in the display.
Press Reset.
2.
If you want to operate your
Note:
appliance via the Home Connect app
again, you will need to reconnect it to
your home network and to the
Home Connect app.
Updating the software
You can update the Home Connect
software on your appliance. As soon as
a new software update is available, a
note appears in the display: Software
update is available. Would you like to
install update?
Install the update directly via the
message in the display or manually as
follows:
Press à .
1.
Press Software Update.
2.
The Home Connect software will now be
updated.
Confirm the message in the display.
3.
If no software update is available,
Note:
Your software is up to date. appears in
the display.
The software update may take
Note:
several minutes. Do not switch the
appliance off while updates are being
installed.