Page 1
With the latest in GPS technology, RCD-1000 device also can become a GPS Receiver to deliver GPS information. Before starting using the device please refer to the following for content checking.
Page 2
Button, Mini USB, Volume Control & External Antenna Port Speed Limit button POI Button Mini USB Port Volume Control External Antenna Port (1) The POI record Button: Press for more than 2 seconds to record current position. A short beep sound will inform you that the POI has been successfully store User can manage the POI information via the supplied software.
Page 3
LED Display & Audio Alarm Front View English...
Page 4
Event LED Display Audio Alarm Green+ Red (No 1+No 2+No3), 1 beep System Initialize Sweeping Green (No.1) Blinking GPS Search Green (No.1) Glowing 2 beeps after GPS is fixed GPS Fixed Memory full /Erase Red (No 2) Glowing/Blinking Approach Not exceed Glowing 3 beeps Certified...
Page 5
Connect to PC or Notebook for “Speed Camera Detector Utility” User can upload the Camera database and manage the POI using the supplied “Speed Camera Detector Utility”. User also can download the GPS log file to PC/Notebook supplied software. Refer to the supplied software application user manual to install the software utility.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the RCD-1000 and is the answer not in the manual?
Questions and answers