Remote Controller - Haier L26V6-A8 Owner's Manual

Remote controller

Battery loading
1.Slide open the cover of the battery compartment on the back of
the remote controller.
2.Load two 5# alkaline batteries in the compartment. (plus and
minus poles to respective mark)
3.Replace the cover of the battery compartment.
1
Precautions
Make sure that there is no
obstacle between the remote
controller and television set.
Keep the remote controller
away from heat source or
humid area to ensure
effective performance of
the remote controller.
English-7
2
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Make sure that two 5# 1.5V alkaline
batteries are loaded. The batteries
must be of the same type. The batteries
must be located properly. The batteries
are not rechargeable.
3