Operation instructions
CH+
VOL-
MENU
VOL+
CH-
English-9
Power ON/OFF
1.Switch on power supply (indicator in red in
standby)
2.If the television is on standby mode , you could
press CH+/- or digits buttons on remote controller
or POWER
3.If you want to switch off the TV to standby mode
press POWER
remote controller .
4.Disconnect the power supply or unplug the
television if it is intended to completely cease the
television performance.
NOTE:To avoid data errors,switch on the television after
the indicator goes out after the television is swi-
tched off.
Automatic standby
Under PC state, 1minutes later after no signals
are input, the television will enter standby status
automatically.
Menu
operating with remote controller)
1.MENU: main menu entry, menu exit or return to
next higher level menu.
2.VOL+: next lower level menu entry.
3.VOL-/+: adjust item you have selected in menu.
4.CH+/-: option of next higher/lower level item.
5.If there is no operation, the display will disapp-
ear on the time of your set. Timer can be set 5 se-
conds , 10 seconds,15 seconds,20seconds, 25
seconds,30seconds and 40 seconds.
button on the TV to turn on the TV.
button on TV or
button on