Cisco 12000 Software Manual page 28

Deployment
Figure 3-22 Chassis Configuration Window
Choose the Chassis you want to commission from the list box at left of the window. Cisco 12000/10720
Step 2
Router Manager allows you to select and commission multiple chassis simultaneously.
Note
Configure the parameters displayed on the Configuration and Additional Description tabs, as required.
Step 3
Note
Click Commission (located in the Actions frame).
Step 4
Cisco 12000/10700 v3.1.1 Router Manager User Guide
3-28
To select a contiguous block of chassis, click on the first chassis; then, without releasing the
mouse button, drag to the last desired entry and release. A subsequent click anywhere on the
window deselects all previous selections. To extend a currently selected block of chassis, hold
the Shift key down and click on the entry at the end of the group to be added. To add a
non-contiguous entry to the selection group, hold down the Ctrl (Control) key and click on the
entry to be added. It is recommended to commission at the most 15 chassis at a time.
See "Chassis Configuration" section on page 4-7
Configuration window.
Chapter 3
for detailed information on the Chassis
Getting Started
OL-4455-01