Troubleshooting - Cooke & Lewis CLGCH60-C Manual

Troubleshooting

GB IE
Troubleshooting
Fault
Excessive
Vibration
Light on, but
motor does
not work.
Both light and
motor do not
work.
Suction
performance
reduced.
Works normally
but cooking
smells linger.
16
Cause
The Appliance is not hung
properly on the brackets.
The fan blade is damaged. Switch off the appliance.
The fan motor is not fixed
tightly.
The fan blade is jammed.
The motor is damaged.
Light bulb blown.
Power connection loose.
Speed may be too low.
Distance between the
cooker hood and the hob
is too great.
Aluminium grease filter is
dirty.
Top vent might be
obstructed. (CLVH60SS-C
& CLVH60W-C)
Optional vent kit might be
twisted.
Charcoal filter not fitted
in recirculation mode or
charcoal filter is full of
grease.
Solution
Take down the appliance
and check it is properly
fixed.
Repair to be carried out by
qualified service personnel
only.
Replace with a bulb with
correct rating.
Check power supply.
Select a higher speed.
Readjust the distance to:
Gas hobs: 750mm
Electric hobs: 650mm
Clean filters. (see care
and maintenance)
Clear any obstruction.
Ensure that the vent kit is
fitted to the manufacturers
instructions.
Fit charcoal filter if
recirculating or change
the filter. (see care and
maintenance)