Cisco Wireless Express 526 Quick Start Manual page 10

Table 1 Startup Wizard Information (continued)
Wizard Setting
WLAN SSID
RADIUS Server IP Address
802.11b Network Status
802.11g Network Status
Auto-RF
10
Action
The network name, or service set identifier
(SSID). This is the default SSID that the access
points use when they join a controller.
The IP address of the RADIUS server if one is
available and you intend to use it. If you are using
a RADIUS server, the following fields must be
completed:
• Shared secret format (ASCII or HEX)
• Shared secret
• Confirm shared secret
• RADIUS server port (default port is 1812)
• Server status (enabled or disabled)
Check the checkbox to enable or disable the
802.11b radio network. The default is Enabled.
Check the checkbox to enable or disable the
802.11g radio network. The default is enabled.
Check the checkbox to enable or disable
automatic radio resource management. The
default is enabled.