Channel Menu; Channel Scan; Channel Skip - Haier HL47K Owner's Manual

Channel menu

This TV set has two methods to set channels, which are
respectively Channel Scan, Channel Skip.
In this section, how to use the remote control to set
channel is explained. You can also use buttons on the TV to
set channel.
Note
The Channel menu will be only operated in normal TV mode.

Channel Scan

1. Press MENU button and then use
Channel menu.
2. Press or OK button to select Tuner.
3. Press / button to select Cable or Antenna mode.
4. Press / button to select Channel Scan.
5. Press or OK button to start searching.
6. To cancel searching, press EXIT button.
Note
When Antenna is selected, the TV will detect antenna
signals and will search for antenna TV (NTSC and
ATSC) channels available in your local area.
When Cable is selected, the TV will detect cable
company supplied signals and will search for cable TV
(NTSC,QAM modulated) channels available in your
Area.

Channel Skip

A skip channel is skipped when using CH+ and CH-
button to browse the channels. A skip channel can
be watch by key-in the channel number or select by
list.
Default un-scanned analog channels are skip.
Channel with a check icon is a skipped channel.
1 Press MENU button and then use .
Channel menu.
2 Press . or OK button and then use
Channel Skip.
3 Press . / button to select a channel, then press OK
button to toggle between
/ button to select
/ button to select
/ button to select
and .
Video
Tuner
Channel Scan
Audio
Channel Skip
Channel
Function
Lock
Channel
Video
Status: Scanning
Analog Channels:
Audio
Digital Channels:
Channel
Function
Lock
Channel Scan
Video
Tuner
Channel Scan
Audio
Channel Skip
Channel
Function
Lock
Channel
Video 1 Analog
2
Analog
3 Analog
Audio
4
Analog
5 Analog
Channel
5-1
Digital
6 Analog
7
Analog
Function
8 Analog
9
Analog
Lock
10 Analog
Channel Skip
Operation
Antenna
OK Scan Select EXIT Back
/
Antenna
19
0
64%
EXIT Cancel
Antenna
OK Enter Select EXIT Back
/
KPIX-DT
Select
OK Set / EXIT Back
Owner s Manual 19