Subscribe to Our Youtube Channel
Related Manuals for BCP SKY6467
Summary of Contents for BCP SKY6467
- Page 1 INSTRUCTION MANUAL 2-Tier Square LED Cantilever Umbrella with Fillable Base SKY6467 + SKY6468 + SKY6469 + SKY6470 + SKY6471 + SKY6472 Ver. 1...
- Page 2 Do not use without umbrella base weights. Recommended Weight: >200 lbs. bestchoiceproducts.com...
-
Page 3: Tools Required
NOTICE Please retain these instructions for future reference. • Umbrella base weights are not included. Do not use without umbrella base weights (recommended weight: >200 lbs.). • Place umbrella on a stable and level surface. • Umbrella is suitable for rain showers and light wind. •... - Page 4 PARTS ROTATOR BASE FOOT PEDAL ROTATOR PLATE 1 PC 1 PC 1 PC ADAPTER COLLAR UMBRELLA SOLAR PANEL 1 PC 1 PC 1 PC CRANK HANDLE COVER SUPPORT UMBRELLA COVER 1 PC 1 PC 1 PC BASE WEIGHT I BASE WEIGHT II 2 PCS 2 PCS...
-
Page 5: Before First Use
BEFORE FIRST USE Hold the part H umbrella upside down and shake gently to separate the umbrella ribs. If necessary, carefully pull the ribs apart to free them. Insert and secure the part J crank handle into the crank mechanism on the part H umbrella. Slowly turn the crank to open the umbrella. - Page 6 PRODUCT ASSEMBLY Press down on the pedal to rotate the base and expose the lower mounting holes. Overlay the rotator base with the crossbars. Attach the part D rotator base to the part A & B crossbars with four part 3 screws and four part 5 washers.
- Page 7 PRODUCT ASSEMBLY Fill the part M & N base weights with your choice CAPACITY PER WEIGHT: of sand or water. (DO NOT MIX sand with water) 220LBS WATER OR 308LBS SAND Place the base weights over the crossbar assembly, place the part N weights closest to the part D rotator base and the part M weights on the outside.
- Page 8 PRODUCT ASSEMBLY Insert the battery connector from the part H umbrella into the part I solar panel. Screw the solar panel onto the top of the pole. Firmly insert the part H umbrella onto the part G adapter collar. Insert and tighten the part 2 knob to secure.
-
Page 9: Adjusting The Tilt
OPENING THE CANOPY Grip and squeeze the handle to engage the release. Move the arm up. Release the handle to lock the canopy in your desired position. Slowly turn the crank to open the canopy. ADJUSTING THE TILT Grip and squeeze the handle and move the arm up/down to adjust the tilt angle of the umbrella. Lock it in your desired position by releasing the handle. -
Page 10: Turning On The Lights
TURNING ON THE LIGHTS • Press the power switch on the canopy to turn on LED lights. CLOSING THE CANOPY • Turn the crank counterclockwise to close the canopy. - Page 11 STORAGE • Close the canopy when umbrella is not in use. • Grip the handle and move the arm all the way down, then secure the umbrella with the attached touch fastener. • Slide the part K cover support into the part L umbrella cover, then unzip the cover. •...
-
Page 12: Help Center
HELP CENTER Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com CHAT Chat Support Product Inquiry Orders FAQ Product Assembly Returns & Refunds PRODUCT WARRANTY INFORMATION All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included.
Need help?
Do you have a question about the SKY6467 and is the answer not in the manual?
Questions and answers