Getting Started - LeapFrog My Pal Scout Smarty Paws Instruction Manual

GETTING STARTED

PERSONALIZATION
Step 1
Using a smartphone, tablet or
computer with a 3.5mm headphone
jack, go to leapfrog.com/SmartyPaws.
Follow the instructions to select your
child's name and favorite things.
For a list of supported browsers, see
System Requirements on the opposite
side of this guide.
Step 2
Open the hook-and-loop fastener on the back of Scout to
access the battery box. Use a screwdriver to loosen the screw
and slide open the battery box door to reveal the Cable. Slide
the On/Off/Volume Control Switch to the On position.
When prompted by the website, connect the Cable in Scout's
battery box to the 3.5mm headphone jack or adapter on your
smartphone, tablet or computer. Do not plug the Cable into
peripheral or external accessories such as speakers, docks,
etc. Follow the instructions on the website to begin the
download.
Step 3
When personalization is complete, disconnect the Cable from
your device and tuck the Cable back into the battery box.
Close the battery box door and use a screwdriver to tighten
the screw to secure. Close the hook-and-loop fastener over
the battery box.
4