Installation; Technical Data; Working Mode - kobi Solar LED MHCS 10W User Manual

EN
USER MANUAL
Dear customer, thank you for your purchase. Please read the following instruc-
tion carefully before using this product.

TECHNICAL DATA:

Product name
Dimensions
LED Layout
Color temperature
Battery
Photovoltaic power
Power consumption
Luminous flux
Lighting angle
Durability of lighting time
Tightness class
Angle range of panel movement
Angle range of bracket movement
Motion sensor detection area
Detection angle of motion sensor
Warranty
PRODUCT FEATURES:
Powered by solar energy
AUTO
Auto on/off light switching
4 working modes
Replaceable battery
0
$
Zero electricity cost
Motion sensor/constant light mode
IP65 protection class
Power bank function
Kobi-Light Sp. z o.o. Spółka Komandytowa ul. Boya-Żeleńskiego 2, 35-105 Rzeszów
Solar LED MHCS 10W
348x239x34 mm
55*SMD2835
4000K
Replaceable Li-ion; 3,7V / 7200mAh
6,5Wp + 4,5 Wp
10W
1100Im
90°
15 000h
IP65
135°
360°
Up to 8m
120°
24 months (12 months for battery)

INSTALLATION:

1.
Take out the whole lamp from package, confirm the installation location and
wire length.
2.
Use the card to measure hole position correctly. Drill 4 holes of 8 mm wide
and 60 mm deep on the wall.
3.
Fix expansion screw into the holes with a spare space, then fix the solar panel
and LED lamps.
4.
Open the silicon cover at the bottom of the lamp, connect the wire from the
solar panel to the lamp and screw it tightly.
5.
Adjust the solar panel and LED lamp to the right position according to lighting
direction.

WORKING MODE:

According to the connection of the lamp body with solar panel, the lamp will automat-
ically recognize the Sensor mode, Constant lighting mode or power bank function.
MODE A:
Constant lighting mode(lamp and solar panel separately). Under this work mode,
the motion sensor and photocell induction will not work.
MODE A1: Press
brightness
MODE A2: Press
brightness.
MODE A3: Press
once to 30% constant
twice to 100% constant
3 times to turn off.
www.kobi.pl