Table of Contents
Advertisement
V1 Sport:
Shift cable (reverse gate end)
EJU44270
Rustproofing
Rustproofing the hull, deck, and engine
Spray metallic parts of the hull, deck, and en-
gine with a rust inhibitor such as Yamaha Sil-
icone Protectant and Lubricant.
Rustproofing the internal engine compo-
nents
Rustproof the internal engine components
with a rust inhibitor such as Yamaha Stor-
Rite Engine Fogging Oil.
To rustproof the internal engine components:
(1) Remove the seat. (See page 40 for seat
removal and installation procedures.)
(2) Release the hooks on the port side of the
air filter case, and then lift up the air filter
case cover. NOTICE: Do not lift up the
air filter case cover forcefully. Other-
wise, the fuel hose that is secured to
Care and storage
the air filter case cover could be dam-
aged.
[ECJ02620]
2
1
1 Hook
2 Air filter case cover
(3) Spray a rust inhibitor such as Yamaha
Stor-Rite Engine Fogging Oil into the in-
take opening for 3 seconds. WARNING!
Do not spray flammable rust inhibitor
products on engine surfaces while the
engine is hot. The sprayed substance
or propellants could catch fire.
1 Intake opening
(4) Place the air filter case cover in its origi-
nal position, and then fit the hooks onto
the cover.
TIP:
Make sure that the air filter case cover is se-
curely installed.
(5) Make sure that the area around the wa-
tercraft is clear, and then start the engine
in a well-ventilated area and let it run at
[EWJ00262]
1
80
Advertisement
Table of Contents
