Table of Contents
Advertisement
CIBANO 500 Getting Started
A - OUTPUT / INPUT (CAT III / 300 V)
Configurable output/input (A)
Output: AC or DC voltage or current
Input: analog or binary
B - OUTPUT / INPUT (CAT III / 300 V)
Configurable output/input (B)
Output: AC or DC voltage or current
Input: analog
EXT. BOOSTER
Do not connect.
No functionality
implemented.
EXTERNAL MODULES
®
1×EtherCAT
interface
RJ-45 socket for
connecting external
®
EtherCAT
slave to
CIBANO 500
LEDs indicating the
®
EtherCAT
communication state
C - INPUT
(CAT III / 300 V)
3×voltage inputs for
auxiliary contacts
SAFETY
For connecting the safety dongles
or the 3-Position Remote Safety
Switch
Figure 3-3: Side view of CIBANO 500 with the Auxiliary module
12
V IN (CAT III / 300 V)
Analog voltage input/
external supply input
Resetable mains
overcurrent
Power switch
protection
SERIAL
Do not connect.
No functionality
implemented.
Warning symbol
See Table 3-1: "Warning lights"
on page 13.
Equipotential
ground terminal
Mains power socket
one-phase,
100 V...240 V AC,
50/60Hz
NETWORK
RJ-45 socket for connecting
CIBANO 500 to the computer
OMICRON
Advertisement
Table of Contents
