Advertisement
•
Multi-master mode: it has a minimum of two modules and a maximum of eight modules.
In this configuration, there can be up to four masters (one master + three slaves) and four
slaves. In practice, it is as if there were up to four simple master/slave pairs: although in
this case, the four masters use a single antenna and are interconnected via cable (RS485).
In this way, the operation is much more optimal at the radio-electric level, since the entire
system works using a single frequency.
There is also an indication in each module: correct operation, transmission and power connec-
tion.
The radio control is mounted on a DIN rail in an IP65 box.
MASTER 1
SLAVE 1
B
A
RS-485 link
MASTER 4
B
A
SLAVE 4
User Manual | Radiocontrol 6i-6o ·
3
Advertisement
