Advertisement
Quick Links
Manual
Radiocontrol 6i-6o
06140344 (Radiocontrol 6i-6o 220V Omnidirectional Antenna 169 MHz)
06140347 (Radiocontrol 6i-6o 220V Auxiliary Master Omnidirectional Antenna 169 MHz)
06140348 (Radiocontrol 6i-6o 12 V Omnidirectional Antenna 169 MHz)
06140349 (Radiocontrol 6i-6o DIN Rail Mounting Omnidirectional Antenna 169 MHz)
The radiocontrol 6i-6o is a status transmission system with remote control. In other words, it
enables the status of several switches to be transmitted to a remote location, without cables.
When a switch changes state on the transmitter, that change will be reflected in the correspond-
ing relay state change on the remote receiver. Each transmitter or receiver has six switches and
six relays.
The system is bidirectional, which means that each individual unit is a transmitter and receiver
at the same time, so that, eventually, the remote equipment to which orders are sent can also
send the status of its inputs.
The signals are transmitted in the 169 MHz open band and with 500 mW power, the range of
which is determined by the type of terrain on which the installation is carried out.
CODES:
Advertisement
Related Manuals for Progres Radiocontrol 6i-6o
Summary of Contents for Progres Radiocontrol 6i-6o
- Page 1 06140349 (Radiocontrol 6i-6o DIN Rail Mounting Omnidirectional Antenna 169 MHz) The radiocontrol 6i-6o is a status transmission system with remote control. In other words, it enables the status of several switches to be transmitted to a remote location, without cables.
- Page 2 Now, in all cases, there will only be one master and the rest of the modules will be slaves (maximum, six slaves). The input/output mapping between master and slaves is deter- mined in the factory. MASTER SLAVE 1 SLAVE 6 · User Manual | Radiocontrol 6i-6o...
- Page 3 There is also an indication in each module: correct operation, transmission and power connec- tion. The radio control is mounted on a DIN rail in an IP65 box. MASTER 1 MASTER 4 RS-485 link SLAVE 1 SLAVE 4 User Manual | Radiocontrol 6i-6o ·...
-
Page 4: Technical Specifications
This symbol indicates that electronic devices should not be disposed of along with household waste at the end of its useful life. The product must be taken to the corresponding collection point for electronic equipment recycling and correctly processed pursuant to Spanish legislation. · User Manual | Radiocontrol 6i-6o... -
Page 5: Operation
If communication is interrupted, the contact on the output marked as ALARM will open. The contact remains closed when the communication is correct. On the slave, this output has no functionality. User Manual | Radiocontrol 6i-6o ·... - Page 6 When an input is activated, the corresponding relay in the reciprocal module is activated. The green LED on the module where the input is activated and the red LED on the module where the output is activated will also be activated. · User Manual | Radiocontrol 6i-6o...
- Page 7 Power supply: Each of the modules is delivered with a 220 Vac 12 Vdc, 2A transformer, in the case of modules powered at 220 Vac. Power supply Outputs Master 5-30 Vdc Inputs Outputs Power supply Slave 5-30 Vdc Inputs User Manual | Radiocontrol 6i-6o ·...
- Page 8 • Remote control for starting submerged pumps in wells. Sistemes Electrònics Progrés, S.A. Polígon Industrial, C/ de la Coma, 2 | 25243 El Palau d’Anglesola | Lleida | España Tel. 973 32 04 29 | info@progres.es | www.progres.es R-2374...