Seat NAVI SYSTEM PLUS Owner's Manual page 21

Manually tuning in a station frequency.
Briefly press the setting knob
›››
Fig. 1 .
4
Manual frequency selection is also
Hiding the fre-
closed if you select a station with a
quency band
station button. If no operation is per-
formed, the frequency range will dis-
appear after a period of inactivity.
Storing stations
Press and hold the desired preset
Storing the sta- ›››
button Fig. 14 until an audible sig-
tion being lis-
nal is heard.
tened to on a
The tuned in station will be stored on
preset button
this preset button.
1) Depends on the market and unit in question.
Audio and Media Mode
Storing stations
›››
Press the
Station
button to open the station list.
The stations that are already stored
on a preset button are marked on the
station list with the symbol
›››
Fig. 15.
Select the desired station by press-
Storing a sta-
ing and holding it on the screen. A
tion from the
screen will appear to store the sta-
station list to a
tion on the memory buttons.
preset button
Press the preset button where the
station is to be stored.
An audible signal is heard and the
station is stored on the preset but-
ton. To continue storing other sta-
tions from the list, repeat the proc-
ess.
All the stored stations can be deleted
Deleting stored
together or separately from the
stations
AM, DAB Setup menu
Set a station name (FM frequency range)
In some cases the name of the station is too
long. This text may be blocked/unblocked by
pressing on the station name for 3 seconds
until hearing an audible signal (a dot will ap-
pear/disappear on the left and right of the
station name).
Scan function (SCAN)
Fig. 14 When the scan function is active, all availa-
function
ble stations on the current frequency band
are played in sequence for approximately 5
seconds each.

Starting and stopping the scan function
Starting the scan
function
Stopping the
scan function
FM,
›››
page 21.
Automatic storing of stations
1)
Press and hold the RADIO button for approxi-
mately 10 seconds to carry out the autostore
function to store the radio stations with the
best reception at the present moment. The
stations will be stored on the memory but-
tons.
From the main radio screen, briefly
›››
press the setup button Fig. 1 .
4
OR: Press the function button
Setup
and then select .
SCAN
Press the function button to

stop the scan function at the station
that is currently playing.
OR: Briefly press the setup button.
Manually selecting a station with
the preset buttons or changing the
screen also stops the scan function.
»
19