Seat NAVI SYSTEM PLUS Owner's Manual page 10

Operation of the function buttons and
the instructions on the screen
View of some of the function buttons
Fig. 2
on the screen.
Sound setup menu
Fig. 3
The Infotainment system comes equipped
›››
with a touchscreen Fig. 1
Active areas of the screen that call up a cer-
tain function are called "function buttons".
8
These buttons are operated by briefly press-
ing the screen or by pressing and holding.
The function buttons appear in the instruc-
tions with the label "function button" and a
button symbol
Function buttons start functions or open sub-
menus. The currently selected menu is dis-
played in the title bar
menus.
Inactive (grey) function buttons cannot be se-
lected.
Increase or decrease the size of the images
displayed on the screen
The size of the navigation map image
›››
page 40
viewing images
or reduced. To do so, enlarge or reduce the
image displayed by moving two fingers.
Overview of screen and function buttons
Display and function buttons: operation and ef-
fect
The title bar shows the selected menu and,
A
where applicable, other function buttons.
Press it to open another menu.
B
.
3
Introduction
.
inside a rectangle
›››
Fig. 2
of the sub-
1
and, for example, photos when
›››
page 23
can be enlarged
Display and function buttons: operation and ef-
fect
The scroll bar is shown on the right and its size
depends on the entries in the list. Move the
bar on the screen by pressing lightly and with-
C
›››
out lifting the finger, see page 9, Open
list entries and search lists.
Movable cursor: Move the cursor around the
screen by pressing lightly and without lifting
the finger.
OR: To move the cursor to a particular posi-
tion, press that spot on the screen.
D
Fixed crosshair: Press the up, down, left and
right arrows to move the sound according to
preference. The cursor will move.
D
OR: Press the central button to centre the ster-
eo sound in the centre of the passenger com-
partment
Press it on some lists to move up a level, one

by one.
Press to return from the submenus one at a
BACK
time to the main menu or to undo the entries

made.
When pressed, a pop-up window opens (op-
tions window) which displays other setup op-

tions.
Some functions or messages are accompanied
by a check box and are activated  or deacti-
 / 
vated  by pressing said check box.
OK Press to confirm an entry or a selection.