Download
Share
Print this page
  1. Manuals
  2. Brands
  3. VegaStream Manuals
  4. Network Router
  5. Vega 50 FXO
  6. Configuration

VegaStream Vega 50 FXO Configuration

Standalone mode
Hide thumbs

Advertisement

Quick Links

Download this manual
This document describes how to configure a Vega 50 FXO H.323 unit using the web browser
interface. The configuration described will allow the Vega to be rapidly installed and tested.
The instructions below configure the Vega 50 FXO (connected to 8 extension ports of a PBX or a
CO Switch) as follows:
•
Calls presented to the Vega from the PBX or CO switch will be routed to a pre-defined IP
address based upon the physical port on the Vega on which the call arrived. (IP
addresses 192.168.1.100 to 192.168.1.107)
•
Calls received by the Vega on the H.323 interface will be routed to the telephony interface.
The physical interface over which the call is routed will be defined by the IP address of the
H.323 device making the outbound call. The telephone number that will be dialled will be
the number presented by the H.323 device.
POTS Telephones
Version 0.5
For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater.
Vega 50 FXO
pbx
...
26 August 2004
Initial configuration
Vega 50 FXO (H.323)
Standalone mode
LAN
Page 1 of 37
© 2002-2004 VegaStream Ltd.
– R5.1

Advertisement

loading

Related Manuals for VegaStream Vega 50 FXO

Summary of Contents for VegaStream Vega 50 FXO

  • Page 1 This document describes how to configure a Vega 50 FXO H.323 unit using the web browser interface. The configuration described will allow the Vega to be rapidly installed and tested. The instructions below configure the Vega 50 FXO (connected to 8 extension ports of a PBX or a CO Switch) as follows: •...
  • Page 2 Configure pointer to CD ROM documentation Save Changes Archive Vega Configuration Please also see: Technical Support Version 0.5 26 August 2004 Page 2 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 3 The LAN LEDs will also illuminate indicating 10 (baseT) or 100 (baseTx) connection, and the FDX LED will illuminate if Full Duplex mode has been negotiated. Version 0.5 26 August 2004 Page 3 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 4 If this is not the IP address required, it can be overridden, together with other LAN parameters by typing: set lan.use_dhcp=0 set lan.ip=aaa.bbb.ccc.ddd set lan.subnet=eee.fff.ggg.hhh set lan.gateway=iii.jjj.kkk.lll save reboot system Version 0.5 26 August 2004 Page 4 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 5 Enter the IP address of the Vega into the “Address” field of your web browser. You will then be presented with the login page: Version 0.5 26 August 2004 Page 5 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 6 Enter the default Username and Password Username: admin Password: admin Select On the left hand side menu select Users Version 0.5 26 August 2004 Page 6 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 7 If the web interface is not used for this length of time the Vega will automatically log off the session. This change is only activated by logging out and back into the browser session. Version 0.5 26 August 2004 Page 7 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 8 Optional: If there are any LAN values that need to be set up (e.g. NTP server or tftp server) set them up now, then Select and then click “here” to return Version 0.5 26 August 2004 Page 8 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 9 – back towards this configuration, as this will improve call setup times. Version 0.5 26 August 2004 Page 9 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 10 Firstly, turn off the default profile: In the Profiles section, Profile ID 1 Select Version 0.5 26 August 2004 Page 10 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 11 Now create a new profile and in it create dial plan entries to handle calls being sent from the PBX / CO switch to the LAN: In the Profiles section Select Version 0.5 26 August 2004 Page 11 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 12 In the Profiles section for Profile 2 (the new profile): Select Set Name = Outbound_To_LAN select and then click “here” to return Version 0.5 26 August 2004 Page 12 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 13 In the Profiles section for Profile 2 (Outbound_To_LAN): Select Version 0.5 26 August 2004 Page 13 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 14 It presents a dialled telephone number 206 (2 preceding the interface ID)) select and then click “here” to return Version 0.5 26 August 2004 Page 14 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 15 “here” to return … repeat for interfaces 08 to 13. This will result in the following: Version 0.5 26 August 2004 Page 15 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 16 On the left hand side menu select Dial Plan Version 0.5 26 August 2004 Page 16 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 17 In a similar manner to adding profile 2 add another profile, profile ID 3, Set Name = Inbound_from_LAN Version 0.5 26 August 2004 Page 17 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 18 “here” to return … repeat for interfaces 07 to 13. This will result in the following: Version 0.5 26 August 2004 Page 18 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 19 “The Dial Planner” in the Vega Primer. Version 0.5 26 August 2004 Page 19 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 20 Add more codecs so that by default the Vega will handle calls with any of the codecs it supports. In H.245 Capabilities Select Version 0.5 26 August 2004 Page 20 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 21 “here” to return Modify all H245 Cap ID entries until the list looks as follows: Version 0.5 26 August 2004 Page 21 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 22 Adjust them so that they have the capabilities as indicated below: Scroll to the bottom of the Media Channels page Version 0.5 26 August 2004 Page 22 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 23 T.38 codec is offered (as configured here), because if both are offered negotiations do not always complete correctly. Version 0.5 26 August 2004 Page 23 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 24 Version 0.5 26 August 2004 Page 24 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 25 On the left hand side menu select POTS Scroll down to the bottom of the page Version 0.5 26 August 2004 Page 25 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 26 For QSL ID 1 in the QSLACK Codec Configuration section: Select Version 0.5 26 August 2004 Page 26 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 27 “here” to return Repeat setting Not NT for QSL ID 2 to 8 Version 0.5 26 August 2004 Page 27 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 28 Now configure the FXO ring cadence detector so that it detects incoming ring cadences correctly: Scroll down to the bottom of the page Select Advanced POTS Version 0.5 26 August 2004 Page 28 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 29 Scroll down to the bottom of the page Version 0.5 26 August 2004 Page 29 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 30 Select Version 0.5 26 August 2004 Page 30 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 31 Ring tones parameters Country Ring tone values Longest silence 2000ms 4000ms Shortest ring 400ms 2000ms select Version 0.5 26 August 2004 Page 31 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 32 “here” to return Version 0.5 26 August 2004 Page 32 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 33 On the left hand side menu select Scroll to the bottom of the screen Select Advanced LAN Version 0.5 26 August 2004 Page 33 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 34 (Substitute appropriate drive letter if D: is not the CD-ROM) select and then click “here” to return Version 0.5 26 August 2004 Page 34 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.

  • Page 35: Save Changes

    The Vega will reboot and once back on-line, it will be ready to take its first call. Version 0.5 26 August 2004 Page 35 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 36 If the ftp server requires a login username and password configure the following: set _advanced.lan.ftp.anonymous_login=0 set _advanced.lan.ftp.username=<ftp username> set _advanced.lan.ftp._password-<ftp password> Version 0.5 26 August 2004 Page 36 of 37 For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater. © 2002-2004 VegaStream Ltd.
  • Page 37 12. Technical Support Support information can be found on the VegaStream Support web site www.VegaAssist.com If you require help from VegaStream support personnel, please use the serial interface or telnet into the unit, log in and then type: show support...

This manual is also suitable for:

H.323