Cisco Linksys PAP2 Installation And Troubleshooting Manual page 19

Action Command
(press these
keys on the
telephone)
Set Static Gateway IP 131
Address
Check MAC Address 140
Check Firmware 150
Version
Manual Reboot 732668
Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Interactive Voice Response Menu
Choices
Enter the IP
address using
numbers on the
telephone keypad.
Use the * (star) key
when entering a
decimal point.
Description
To set a static gateway IP address, the
DHCP feature must be disabled. If the
DHCP feature is enabled, then you will
hear, "Invalid Option," if you try to set
a static gateway IP address.
You will hear the MAC address of the
Phone Adapter in hexadecimal string
format.
You will hear the version number of
the firmware currently installed on the
Phone Adapter.
After you hear, "Option successful,"
hang up the phone. The Phone
Adapter will automatically reboot.
Phone Adapter with 2 Ports for Voice-over-IP
13