Rear Panel Connections - Cambridge Audio AXA25 Manual

8

Rear panel connections

Last updated: July 29, 2022 10:23. Revision #5417
1. Audio inputs (A1-A4) - These inputs are suitable for any 'line level' source equipment such as the audio outputs of CD players, streaming
devices such as a Chromecast Audio (RCA Phono to jack cable required) etc.
2. Rec out - Connect to the recording input of a CD recorder, tape deck or other compatible recording device etc.
This output provides a constant high level output that does not fluctuate with the volume, balance or tone controls of the main unit. For this reason,
the AXA25 cannot be used as a Preamplifier only or with a subwoofer.
3. USB power 5V 500mA - This USB connection is designed to charge a device, such as a smartphone. The charging device needs to require 5V
DC to be able to be charged.
Note: This is not an input so will not allow you to play audio directly to the unit.
Note: Do not use this port for charging a device and using it as a source at the same time, as this will create a ground loop that will cause
interference during playback.
4. Loudspeaker terminals - Note: When using a banana plug, make sure the speaker terminals are completely tightened before inserting the
plug.
Connect the wires from your left channel loudspeaker to the Left positive and negative terminals and the wires from the right channel loudspeaker
to the Right positive and negative terminals.