Mounting Recommendations - Access OCR310 Product Manual

9. Mounting Recommendations

The unit is designed to be flush mounted against the wall guide that the document is swiped along. The
document should be held close to the camera window during the swiping operation.
Recommend slot width should be 1.5mm, with a maximum of 2.0mm allowable. Please also ensure that the
camera window area is directly opposite a matt black surface on the opposing wall.
To ensure a smooth swipe action and thus reliable read, Access IS recommends the use of a smooth wear
resistant stainless steel track guide. This will also help reduce the possibility of debris occurring from swiped
media which could cause reading problems.
Example dimensional position of the unit within the track assembly:-
Revision 4  Access Limited 2009 - All Rights Reserved
Page 17 of 19