Operation - Access OCR310 Product Manual

6. Operation

The unit will produce an output once a document is swiped. It will substitute an asterisk for any character it
does not recognise. If it has more than seven characters it does not recognise then it outputs thirty asterisks.
If it does not recognise the document at all it will disregard the read and output nothing.
If there are any errors there are three short pulses on the sounder output and a pulse on the LED output. For
a good read there is one short pulse on the sounder output and no pulse on the LED output.
Revision 4  Access Limited 2009 - All Rights Reserved
Page 13 of 19