Advertisement
Quick Links
CRYSTAL CRIB
Follow warnings on all products in a crib .
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
ORBELLE TRADE INC.
347 CLINTON STREET HEMPSTEAD N.Y.11550
516-481-1500
WWW.ORBELLE.COM
email : customerservice@orbelle.com
s
1
Advertisement
Related Manuals for ORBELLE CRYSTAL
Summary of Contents for ORBELLE CRYSTAL
- Page 1 ORBELLE TRADE INC. 347 CLINTON STREET HEMPSTEAD N.Y.11550 516-481-1500 WWW.ORBELLE.COM email : customerservice@orbelle.com CRYSTAL CRIB Follow warnings on all products in a crib . Adult assembly required. Small parts may present choking hazard prior to assembly. Enclosed please find simple step-by-step instructions to help you quickly assemble your products.
- Page 2 . Never use this product if there are any loose or missing fasteners, loose joints,broken parts, or torn mesh/fabric. check before assembly and periodically during use. Contact ORBELLE TRADE INC for replacement parts and instructional literature if needed. . Never substitute parts, the product including side rails, must be fully erected prior to use.
-
Page 3: Connection Hardware
CONNECTION HARDWARE a: M6*55 Allen head bolt (8pcs) Do not use electric hand drill b: M6*15 Allen head bolt (4pcs) c: M6*60 Allen head bolt (4pcs) i: M4*30 Screw(4pcs) d:Allen wrench (1pc) e:Metal pin (6pcs) f:Cam lock (6pcs) Screw driver is not included g:Wood dowel (18pcs) - Page 4 PARTS ENCLOSED IN CARTON A: Head board (1 pc) B: Foot board (1 pc) C: Left side (1 pc) D: Right side (1 pc) E: Mattress Support (1 pc) F: Left front leg (1 pc) G: Right front leg (1 pc) Bottom drawer (1 pc) H1: Drawer front panel (1 pc) H2: Drawer left panel (1 pc)
- Page 5 STEP 1 Attach The Headboard (A) to The left side (C) and right side (D) by using bolts (a) and allen wrench (d) STEP 2 Attach The left side (C) with left front leg(F), and right side (D) with right front leg(G) by using bolts (a) and allen wrench (d)
- Page 6 STEP 3 Locate the mattress support (E) with tabs. Be sure the smooth side of the mattress support (E) is faced upward . Position the tabs of the mattress support(E) to mount to the selected position onto the legs . Insert the bolts (b) , through the tabs and into thread inserts , then tighten securely with allen...
- Page 7 STEP 5 Attach bottom middle support bar (H6) to the Drawer front panel (H1) by using Metal pin(e) and Cam lock(f) Attach bottom support bars (H7) (H8)to the Drawer front panel (H1) by using wood dowel(g) H7/H8 Insert the drawer bottom panel(H5) into the grooves of side panels (H2&H3)and drawer front panel(H1) Assemble drawer back panel(H4) using the screws ( i )( e ) STEP 6...
- Page 8 TODLER GUARD RAIL(SOLD SEPARATELY) TODDLER BED PARTS ENCLOSED IN CARTON d:Allen wrench (1pc) e: M6*50 Allen head bolt (4pcs) H: Toddler guard rail (1 pc) SOLD SEPARATELY Do not use electric hand drill...
- Page 9 Converting crib to a toddler bed Please note that the warning sticker is placed on the cribs to keep parents and caregivers informed it is a requirement by law under CPSC And ASTM. We do apologize for any inconvenience this may cause you. You have the option to convert crib to a toddler bed 1.Remove Footboard(B) to left front leg (F) and right front leg(G) by Allen wrench(d) 2.Install the mattress support (E) in its lowest position.