Advertisement
Quick Links
Read all instructions before assembling.
Save instructions for future use.
Carefully remove and lay out all parts.
Familiarize yourself with all diagrams to
facilitate the assembly of your product
. Check parts and the enclosed hardware bag
with the hardware parts list to be sure all
are included and quantities are correct.
Destroy cardboard and plastic bags
immediately.For this changing table, the
maximum weitht of the child is 30lbs,any
child over 30lbs, pls don't use.
MANUFACTURE DATE: APR 2011
ALL DIAGRAMS ARE FOR ILLUSTRATION ONL Y
ASSEMBLY INSTRUCTIONS
CHANGING TABLE
STYLE NO:3143
ORBELLE'S ORIGINAL DESIGN
SEE MORE PRODUCTS AT:
WWW.ORBELLE.COM
DO NOT RETURN TO
STORE CALL OR EMALL
FOR REPLACEMENT
516-481-1500 or
customerservice @
orbelle . com
Attention: In order to properly assemble
the changing table, follow the assembly
instructions carefully .
Failure to assemble in the manner recomm-
ended could make the chaning table hazardous.
Warning:Never use this product if there are any
loose or missing fasteners, loose joints,broken
parts, or torn mesh/fabric. check before
assembly and periodically during use. Contact
ORBELLE. for replacement parts and
instructional literature if needed.
1
MADE IN CHINA
Advertisement
Related Manuals for ORBELLE 3143
Summary of Contents for ORBELLE 3143
- Page 1 Destroy cardboard and plastic bags assembly and periodically during use. Contact immediately.For this changing table, the ORBELLE. for replacement parts and maximum weitht of the child is 30lbs,any instructional literature if needed. child over 30lbs, pls don’t use.
- Page 2 FALL HAZARD-To prevent death or serious injury, always keep child within arm’s reach. Always secure this pad to the changing surface by inserting safty restraint system across child’s waist. SEE INSTRUCTIONS. PARTS LIST FOR #3143 E: Front stabilizer bar (1PC)
- Page 3 STEP 1 Use allen wrench (c) to connect bolts. Connect stabilizer bar ( E&F)and middle piece (G ) to right head board (B) by wood dowels (b) and bolts (a). STEP 2 Connect front rail (C)and back rail (D) to right head board (B) by wood dowels (b) and bolts (a).
- Page 4 STEP 3 Lay down the assembled parts on the floor. Insert back panel (H) into groove between back rail (D) and back stabilizer bar (F); Insert platform (J) into groove between back rail (D) and front rail (C). STEP 4 Connect rails (C&D), stabilizer bars (E&F) and middle pieces (G) to left head board (A) by wood dowels (b) and bolts (a).
- Page 5 STEP 5 1: Thread cam bolts (f) into the pre-drilled holes on the front panel (DR1), side panel (DR2&DR3), back panel (DR4). 2: Insert cams (g) into the holes on side panel (DR2&DR3), back panel (DR4), bottom support panel (DR6). 3: Attach the knob ( e) to the front panel (DR1) by screws(d) .
- Page 6 STEP 7 1: Attach the bottom support panel (DR6) to the back panel (DR4), front panel (DR1). 2: Attach the front panel (DR1) to side panel (DR2&DR3). 3: LOCK the cams (g) in the bottom support panel (DR6) and side panel (DR2&DR3) by turning them.
- Page 7 . Pull down on the beaded end until it snap locks into the keyhole . 6.Check to make sure the strap is securely laced and locked to the brackets . DO NOT RETUREN TO STORE CALL OR EMAIL FOR REPLACEMENT 516-481-1500 or customerservice @ orbelle.com...