Warn 70045 Installation Instructions

Download this manual

As you read these instructions, you will see NOTES, CAUTIONS, and WARNINGS. Each message has a

specific purpose. NOTES are additional information to help you complete a procedure. CAUTIONS are

safety messages that indicate a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury. A CAUTION may also be used to alert against unsafe practice or possible equipment

damage. WARNINGS are safety messages that indicate a potentially hazardous situation, which, if not

avoided could result in serious injury. CAUTIONS and WARNINGS identify the hazard, indicate how to avoid

the hazard, and advise of the probable consequence of not avoiding the hazard. PLEASE WORK SAFELY!

Before You Begin

This kit is compatible with WARN's line of ATV winches. Winch sold separately. Please read WARN's Winching

Technique guide provided with the winch prior to use of this product.

Table of Contents

Parts List ....................................................... 2

II.

Tools Required .............................................. 2

III.

300EX Installation......................................... 3

III.

Maintenance/Care ......................................... 4

WARN® INDUSTRIES

INSTALLATION INSTRUCTIONS

1.5 CI ATV Winch Mounting Kit

Part Number:

Applications:

NOTICE

Winch and equipment Damage

This mount is designed for a 1500 lb. winch.

Using a higher capacity winch may cause severe

damage to the mount or ATV.

Read installation and operating instructions

thoroughly.

70045

HONDA 300EX

PAGE 1

70050 Rev A0

Page 1 PLEASE WORK SAFELY! Before You Begin This kit is compatible with WARN’s line of ATV winches. Winch sold separately. Please read WARN’s Winching Technique guide provided with the winch prior to use of this product.
Page 2 • Sockets: 12mm, 13mm, 1/2”, 7/16” • Wrenches: 12 mm, 13mm, 1/2” 3870 5/16-18 x 3/4 Hex bolts 6725 1/4-20 Locking Hex Nut 21444 U-Bolt 1/4-20 x 3/4 x 1 1/4 1320 1/4 Flat Washer WARN® INDUSTRIES PAGE 2 70050 Rev A0...
Page 3 Inspect all nuts and bolts on the winch, winch mount, and related hardware prior to each use. Tighten all nuts and bolts that appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced WARN® INDUSTRIES PAGE 3 70050 Rev A0...