Advertisement
KD-LH70R
QQ
2.2.5 Removing the clamper assembly
3 7 63 1515 0
(See Figs.10 and 11.)
• Prior to performing the following procedure, remove the top
cover.
(1) Remove the clamper arm spring.
(2) Move the clamper assembly in the direction of the arrow to
release the two joints d.
Clamper arm
spring
Joint d
Clamper assembly
2.2.6 Removing the loading / feed motor assembly
(See Figs.12 and 13)
TE
L 13942296513
• Prior to performing the following procedure, remove the top
cover, connector board and chassis unit.
(1) Remove the screw C and move the loading / feed motor
assembly in the direction of the arrow to remove it from the
chassis rivet assembly.
(2) Disconnect the wire from the loading / feed motor assembly
if necessary.
CAUTION:
When reassembling, connect the wire from the loading / feed
motor assembly to the frame as shown in Fig.12.
www
1-10 (No.49803)
http://www.xiaoyu163.com
Chassis rivet
assembly
Joint d
Fig.10
x
ao
y
.
i
http://www.xiaoyu163.com
8
Clamper arm spring
Joint d
Chassis rivet assembly
Q Q
3
6 7
1 3
Loading / feed motor assembly
C
u163
.
2 9
9 4
2 8
Clamper assembly
Joint d
Fig.11
1 5
0 5
8
2 9
9 4
Loading / feed motor assembly
Fig.12
m
co
Fig.13
9 9
2 8
9 9
Advertisement
