Table of Contents
Advertisement
6 Listen to FM
radio
Tune to FM radio stations
Note
•
Ensure that you have connected and fully extended the
supplied FM antenna.
1
Press FM.
2
Press and hold
station.
3
When the frequency starts to change,
release the button.
» The FM tuner tunes to a station with
strong reception automatically.
4
Repeat steps 2-3 to tune to more stations.
To tune to a weak station:
Press
/
repeatedly until you find optimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset radio
stations.
1
In FM tuner mode, press PROG/CLOCK
SET for 3 seconds to activate automatic
programming.
» [AUTO] (auto) is displayed.
» The unit stores all the FM radio
stations automatically and then
broadcasts the first preset radio
station.
EN
16
/
to tune to a radio
Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.
2
Press PROG/CLOCK SETto activate
programming mode.
3
Press
/
to select a number from
1–20 for this radio station, then press
PROG/CLOCK SET to confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat steps 2-3 to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Tune to a preset radio station
1
Press
/
to select a preset number.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
2
Press RDS repeatedly to scroll through the
following information (if available):
» Station name
Advertisement
Table of Contents
