Starting Wash Program; Product View; Control Panel - Diplomat ADP8352 User Manual

Starting the Wash Program (cont.)
1
5
Setting The Start Delay Time
Open the door of the dishwasher partially. Turn on the appliance by pressing the ON-
OFF button '3'. The start time for the wash cycle can be delayed for 2,4 or 6 hours.
Each time the delay button '9' is pressed, the delay indicator light '8' will come on
indicating the length of the delay. After selecting the delay time, the wash cycle can
be set, as explained in "Starting a wash cycle..." There will be a short beep, and at this
point the delay period will begin to count down. During this period the delay indicator
light '8' will blink. At the end of the delay time, the indicator will stop blinking and the
cycle will start.
NOTE:
a) During the delay period, none of the settings can be modified. If necessary, they
can be cancelled by pressing programme selector '5' for about 5 seconds.
b) If the power to the appliance goes off or the door is opened during the delay
period, the clock will stop the countdown. It will start again when the power has
come back on, or when the door has been closed.
1/2 Load Button
This option makes it possible to wash dishes using only the upper rack, if there are
not enough dishes for a full load, This will allow you to save on water and electricity,
however, it cannot be used with the heavy duty wash cycles.
Set the desired programme and the delay option if required, then press the 1/2 Load
Button '2'. 1/2 Load Indicator light '7' will illuminate.
4
2
3
6h 4h 2h
ADP8352
8
6 7 9
12
Know Your Dishwasher
WARNING: After loading, ensure that both spray arms are free to rotate.
We cannot accept responsibility for damage caused by incorrect loading.
1. Upper Basket Spray
2. Upper Basket
3. Upper Basket
Adjustment
4. Upper Basket Spray Arm
5. Lower Basket
6. Filters
7. Detergent Dispenser and Rinse
Aid Container
8. Salt Container
9. Lower Basket Spray Arm
Control Panel Description
1
1. Programme Indicator
2. Half Load Button
3. ON-OFF Button
4. ON-OFF Indicator
5. Programme Select Button
Height
9
8
2
6 7
5
6. Low Salt Indicator
7. Half Load Indicator
8. Delay Indicator
9. Delay Select Button
5
1
2
3
4
5
6
7
4
3
6h 4h 2h
ADP 8352
8 9