Energy Saving Tips; How To Keep Your Dishwasher In Shape - Diplomat ADP8352 User Manual

Haier adp8352: user manual
Table of Contents

Advertisement

Installation cont..
Stage 4
Position the decor door onto the front of the
dishwasher by locating the brackets into the
two plastic studs mounted either side on the
top of the door. Lift the decor door until the
lower brackets locate into the slots in the
appliance door.
Stage 5
Align the top of the decor door with adjacent
cabinets. Gently open door whilst supporting
the decor door. Once in the lowered position,
secure the decor door using the fixing screws
provided as shown in the diagram. Cover the
screw heads using the plastic caps provided.
Stage 6
The dishwasher should now be screwed to the
underside of the worktop, via the two fixing
holes in the top trim
Stage 7
Cut clearance in the plinth to allow the
door to open fully and seal edges with
a suitable varnish to prevent water
ingress.

Energy Saving Tips

It is important to try and run the dishwasher when it is fully loaded in order to save on
energy.
Choose the right wash cycle: the choice of cycle depends on the type of dishware,
cookware and utensils being washed and how dirty they are.
Use the right amount of detergent.
There is no advantage in pre-rinsing dishes, cookware and utensils before placing
them in the dishwasher.

How to keep Your Dishwasher in Shape

After Every Wash:
Turn off the water supply to the appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
Before cleaning always remove the plug from the socket.
Do Not Use Solvents or Abrasive Cleaning Products
To clean the exterior and rubber parts of the dishwasher, do not use solvents or
abrasive cleaning products, use only a cloth and warm soapy water. To remove spots
or stains from the surface of the interior, use a cloth dampened with water and a little
white vinegar, or cleaning product made specifically for dishwashers.
When You Go on Holiday:
It is recommended that you run a wash cycle with the dishwasher empty and then
remove the plug from the socket, turn off the water supply and leave the door of the
appliance slightly open. This will help the seals last longer and prevent odours from
forming within the appliance.
Seals
One of the factors that cause odours to form in the dishwasher is food that remains
trapped in the seals. Periodic cleaning with a damp sponge will prevent this from
occurring.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents