NEC IE-178098-NS-EM1 User Manual page 26

(1) Clock that is already mounted on emulation board
A crystal oscillator (X1) is already mounted on the emulation board. Its frequency is 6.3 MHz.
Note that 6 to 8 are shorted on the parts board.
Figure 3-7. When Using Clock That Is Already Mounted on Emulation Board
IE-78K0-NS
IE-178098-NS-EM1
Mounted
resonator
(to be used)
Remark The clock that is supplied by the IE-178098-NS-EM1's oscillator (encircled in the figure) is used.
(2) Clock that is mounted by user
The user is able to mount any clock supported by the set specifications on the IE-178098-NS-EM1. First mount
the resonator on the parts board, then attach the parts board to the IE-178098-NS-EM1. This method is useful
when using a different frequency from that of the premounted clock.
IE-78K0-NS
IE-178098-NS-EM1
Parts board +
resonator
or oscillator
Remark The clock that is supplied by the IE-178098-NS-EM1's resonator (encircled in the figure) is used.
26
CHAPTER 3 INSTALLATION
Parts board
(mainCLK)
Emulation probe
Figure 3-8. When Using User-Mounted Clock
Emulation probe
Mounted
resonator (not used)
User's Manual U14013EJ2V0UM00
Target system
Resonator
(not used)
Target system
Resonator
(not used)