Terra STI520 Quick Start Manual

Connect antenna
or cable signal source
After connecting the power supply, wait until the green or red status indication LED lights up on the front streamer panel.

Initial login:

• If you connect the streamer to network router - IP address of WEB configuration interface
will be assigned by your network router DHCP server. Use the following mDNS address to
access the device interface:
NOTE: mDNS protocol is supported in Windows and macOS operating systems only.
• If you connect the streamer to personal computer-IP address of WEB configuration interface
will be set to:
If you cannot connect, please read troubleshooting guide and user manual.
Enter default username and password admin/admin in the login window.

Configuration

• After the 1
• Scan all RF channels in the "RF inputs / Channel scanning" menu;
• The "TV channels" menu shows a list of all TV channels. It is recommended to assign a TV
logo to each TV channel. Just open another browser window with TV logos
(e.g. www.lyngsat-logo.com) and drag the icon to the "logo" field. Simple!

Watching TV

• The "Playlist" section of the menu displays the playlist URL for third-party players that
support M3U playlist format. Copy this URL and paste to your video player.
Third-party TV players tested:
o PLEX
o Emby
o SS IPTV
o Smart UP TV
o OTT Player
o Smart IPTV
• "Terra TV" Android app can also be used on Android based TV or phone to watch video.
• Any Smart TV supports DLNA. Just press the "Source" button on the TV remote control and
select STI520 device from the list. Choose a TV channel from the list and enjoy!
NOTE: TVs from different manufacturers may have a different DLNA name. For example, LG
Quickstart Guide STI520
Y
or
http://iptv.local
http://192.168.1.10
login, select the country and the language of WEB control interface;
st
Get it from google play at
calls it "SmartShare".
Connect to network
(home router or PC)
Y
-
Connect power
supply