Heat Operation - Haier HSU-10HM03 Operation Manual

Operation

Heat Operation

Remote controller
1. Unit start
Press ON/OFF on the remote controller, unit starts.
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then Select HEAT operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1 C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
increase 1 C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
IN HEAT mode, warm air will blow out after a short period
of the time due to cold-draft prevention function.
5.Unit stop
Press ON/OFF button, the unit stops.
Regarding the ambient temperature display during
the heating operation.
In defrosting, the indoor temperature value displayed may
be reduced due to the dropping of cooling air of the evaporator
of indoor unit under cooling mode. It is mormal phenomenon.
13
AUTO COOL DRY
LOW
MED HI
FAN HEAT
AUTO