Advertisement
USB Operation
Play MP3/WMA music inside a USB stick. Insert the USB stick with MP3
/WMA musics into the USB port, it will play automatically.
Note: the USB port also supports charging mobile phone, the maximum
charging ability is 5V/1A.
Select Next Track or Previous Track
In the USB mode, briefly press the
or
button to play the the next or
previou track.
Fast Forward/Reverse
Press and hold the
or
button to fast forward or reverse a track.
Play / Pause
Press the
button to interrupt the playback of a music (pause function).
Press this button again to continue the playback.
Introduction Scan
Press the INT button to play the first 10 seconds of each track.
Press again to stop the introduction scan, and play the current track.
Repeating the track
Press the RPT button to toggle between RPT ONE (Continuously repeat
current track) and RPT FOD (Continuously repeat all tracks in current folder),
RPT ALL (Play all track).
Playing all tracks in random
Press RDM once, play all tracks randomly.
Press RDM once again, exit from random playback.
Track/Folder Navigation
- Press the -10/+10 buttons to jump 10 tracks backward or forward.
It is required that over 10 tracks be available on the storage medium.
- Press and hold the -10/+10 button to select the previous or the next folder.
(If there are folders on the storage medium.)
Select the track or file for playback in MP3 format
a) Press the AMS button to enter track search mode.
b) Rotate the volume knob to select the number of your favorite track with
high speed.
c) When the desired track number appears, confirm your selection by
pressing the access the knob.
Troubleshooting
If you suspect something is wrong, immediately switch power off.
Do not use the unit in abnormal condition, for example without sound,
or with smoke or foul smell. Otherwise this can cause fire or electric
shock.
Immediately stop using it and call the store where you purchased it.
Never try to repair the unit by yourself because it is dangerous to do
so.
General
1) Car's engine switch is not on.
Turn you car's key to ACC or ON.
2) Cable is not correctly connected.
Check the connection.
3) Fuse is burnt.
Replace fuse.
4) Volume is in mute or minimum.
Check volume or mute on/off, adjust volume to a desired level.
5) The operation keys do not work.
The built-in micro- computer is not operating properly due to noise.
Press the RESET button to restore the program to zero.
Radio
1) Much noise in broadcasts.
Station or signal is too weak. Select other stations of stronger
signal level.
2) The antenna cable is not connected.
Insert the antenna cable firmly into the antenna socket of this car
radio.
3) Preset station is reset.
Battery cable is not correctly connected. Connect the battery
cable to the terminal that is always live.
USB
USB is connecting but no sound
a) USB connection is not good. Take it out and insert again.
b) USB is damaged or no music file inside.
Change to another USB, or record music inside it.
Aux Audio Operation
Using this socket, it is possible to hear the sound of other playback devices
such as MP3 players, CD players etc. through the car loudspeaker.
1. Please connect the external device with a 3.5 mm stereo jack plug to the
AUX socket.
2. Press the SRC button repeatedly until "AUX IN" appears in the display.
3. You hear the playback from the external device via the loudspeakers.
You can adjust the volume of the external device to a comfortable level with
the volume control of this device.
Bluetooth Operation
Pair and Connect
Pair the mobile phone with the device before using it.
1. In any mode, prior to pairing and connecting, the BT logo is flashing in the
LCD indicating that no device is connected. To begin pairing, enable BT
mode on your mobile phone.
2. When the phone finds the car audio system, the "PLANET AUDIO PM30B"
name will be displayed.
3. Choose the "PLANET AUDIO PM30B" from the device list to pair and
connect with the car audio system. Upon confirming, the BT logo will stop
flashing.
4. When pairing is complete, the mobile phone audio will automatically
transfer to the car audio system whenever a call is made or received, or
when the mobile phone plays music.
Disconnect or reconnect the bluetooth connection
Press and hold the
button to disconnect or reconnect the bluetooth
connection.
Answer a Call
• When the mobile phone is called, the incoming telephone number displays
on the LCD.
• To receive the call, press the
button on the front panel.
Reject or End a Call
To reject or end the call, press the
button on the front panel.
Redial Last Dialed Number
Press the
button on the front panel to redial the last dialed phone number.
Specifications
General
Power supply Requirement :
DC 12V
Maximum power output :
50W X 4CH
Speaker impedance :
4 - 8 Ohm
Unit Dimensions(WxHxD) :
7.0 X 2.0 X 2.76 inches
Weight :
0.84 Lb
Fuse :
10 A
RADIO
FM
Frequency Range:
87.5 MHz - 107.9 MHz (USA)
87.5 MHz - 108.0 MHz (EUROPE)
Channel step:
200 KHz (USA)
50 KHz (EUROPE)
AM
Frequency Range:
530 KHz - 1710 KHz (USA)
522-1620 KHz (EUROPE)
Channel step:
10 KHz (USA)
9 KHz (EUROPE)
USB
Usable Audio Formats:
MP3/WMA
USB Port Type:
2.0
USB Charging:
5V/1A
Pre-amp Output:
Front and Rear
Frequency Response:
20 Hz - 20KHz
S/N Ratio:
60dB
BT
BT Profile supports:
Headset, Handsfree and A2DP & AVRCP
Range of frequency:
2.4GHz
Bluetooth Operation
Switch Audio Between Car Audio and mobile Phone
During a call, press the volume knob to switch the audio source from the car
audio system back to your mobile phone.
Audio Streaming (A2DP)
The unit supports A2DP (advanced audio distribution profile) wireless
streaming audio from your Bluetooth mobile device directly to your head unit.
You can also control your music from the front panel of the head unit using
AVRCP (audio video remote control profile).
1. After pairing, connecting and enabling streaming audio from a compatible
mobile device,
press the SRC button to enter BT mode and the "BT AUDIO" will be shown
on the LCD display.
2. When a mobile device is paired, music played through that device will
automatically be heard through the car audio system.
3. Press the
or
button to play the next or previous on the mobile
phone.
4. Press the
button to pause or resume music playback.
Push-To-Talk
This Push-To-Talk feature allows direct access to Android and IOS smart-
phones voice assistant capability when user establish the bluetooth
connection between user's smartphone and this receiver.
Simply connect directly from this receiver via Bluetooth with
(volume knob).
Note:
Before using the Push-To-Talk, user must enable the mobile data on user's
smartphone.
To use the navigation feature, switch to the BT Audio source to hear voice
commands over your vehicles speakers.
button
Advertisement
