Print From Your Computer; Print From Your Mobile Device - Brother P-touch PT-D460BT Manual

Use the Label Maker
1. Print from the Label Maker
1
STEP Press OK to select "Create Label"
2
STEP Type Text
3
STEP Preview Label
4
STEP Print Label

2. Print from Your Computer

Windows
In your browser's address bar, type install.brother. Download and
install the Printer Driver and P-touch Editor by following the on-
screen instructions.
Mac
Download P-touch Editor from the App Store to print from your
Mac. You do not need to download and install any drivers.

3. Print from Your Mobile Device

Application Installation
Download the applications from the App Store or Google Play™:
Create labels for business use, including
Brother
barcodes, office equipment labels, and folder
iPrint&Label
tab labels.
This app provides access to setup
Support Center
information, product manuals, FAQs, and
App
troubleshooting tips.
To save tape, apply this setting:
Brother iPrint&Label - Chain Printing: ON
Print your labels and leave the last label in the Label Maker until you are ready to print
a new label.
2 2
• When printing from your computer, you must connect the Label Maker and computer
with the included USB Cable or via Bluetooth connection.
• This Label Maker does not support Wi-Fi connections.
http://install.brother
Software
Printer Driver
P-touch Editor
How to enable or disable Bluetooth
1. Check that the printer is on.
2.
[Bluetooth (On/Off)]
Pair the Label Maker with Your Mobile Device via Bluetooth
• If the printer prompts you to enter a PIN, enter "0000".
• Pairing instructions may differ slightly, depending on your mobile device.
• If your mobile device cannot discover the printer via Bluetooth, check the following:
- Place your mobile device as close as possible to the Label Maker.
- Make sure there are no obstacles or items that emit radio waves, such as
a microwave oven, between the Label Maker and your mobile device.
• If a Bluetooth pass key appears on the Label Maker's LCD during pairing, make sure
your mobile device displays the same Bluetooth pass key, and then press [OK].
• This Label Maker does not support Wi-Fi connections.
Features
Software required to print from a Label Maker using a Windows
computer.
Label creation software for computers. This application comes
with built-in drawing tools that allow you to print a wide variety of
custom labels in complex layouts with text of different fonts and
styles, frames, imported images, barcodes, and more.
[Settings] / [Bluetooth]
/ [On]/[Off]
PT-D460BT
4 4
3 3
1 1
/
/
1. Go to your mobile device's settings
menu and enable the Bluetooth
option.
2. Use the pairing number displayed
on the Application Download Label
attached to the front of the Label
Maker.