Table of Contents
Advertisement
Maintenance
Hydraulic cylinder assembly
Reassembly:
1) Reinstall rod through gland (E) and end cap (A);
2) Secure piston (C) to rod with lock nut (D). Torque lock nut to proper value (consult
torque table on the "important data" section);
3) Lube inside of barrel, piston seals, and gland seals with hydraulic oil;
4) With cylinder body held gently, insert the inner assemblies (B) using a slight rocking
motion;
5) Apply Loctite 277 before installing the cylinder end cap (A);
6) Torque cylinder end cap (A) to 400 lb.ft (600 N.m).
Insert the gland (E) on the cylinder head and align it with the tube so
IMPORTANT
it will fit correctly on the cylinder barrel.
NOTE Do not clamp rod by chrome surface.
Marchesan Implementos e Máquinas Agrícolas "TATU" S.A.
C
C
E
E
B
B
GAPCR-HD 8013/GASPCR-HD 9017/GASPCR-EHD 10020
D
D
A
A
75
Advertisement
Table of Contents
