TATU GAPCR-HD 8013 Operator's Manual page 73

Maintenance
Wheelset hubs lubrication
• For models with 9.00 x 20 tires - 14 ply and 600/50 x 22.5 tires - 16 ply.
Check the retainer position (A) to let the excess of grease flow out of the hub and be
careful to not damage the retainer.
Adjust the flat washer (B) and the castle nut (C) on the hub using a wrench to get
some resistance while turning the hub. Do not totally tighten it. Lock it using a cotter pin (D).
Place 5 small flanges (E) on the wheelset hub (F) using a bolt (G) and nut (H). Place
a dust cap (I) facing the wheelset hub (F), the hub cap (J) and lock using a bolt (K) and
spring washer.
A A
G G
Whenever the retainer is damaged, replace it immediately.
Do not forget to apply the specific grease, that is a lithium soap grease for this
equipment, grade NLGI 2 with Extreme Pressure additive, anticorrosive and antioxidant.
Marchesan Implementos e Máquinas Agrícolas "TATU" S.A.
F F
D D
H H
GAPCR-HD 8013/GASPCR-HD 9017/GASPCR-EHD 10020
E E
B B
C C
I I
J J
K K
71