Related Manuals for Gigabyte FGSD-1022VHP
Summary of Contents for Gigabyte FGSD-1022VHP
- Page 1 8-/16-/24-Port 10/100TX 802.3at PoE+ Gigabit TP/SFP Ethernet Switch with Smart LCD FGSD-1022VHP/FGSW-1822VHP/FGSW-2622VHP User’s Manual...
- Page 2 Copyright Copyright © 2021 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
- Page 3 Do not dispose of WEEE as unsorted municipal waste; WEEE should be collected separately. Revision PLANET 8-/16-/24-Port 10/100TX 802.3at PoE+ SFP Ethernet Switch with Smart LCD User's Manual Models: FGSD-1022VHP, FGSW-1822VHP, FGSW-2622VHP Revision: 3.2 (October. 2021) Part No.: 2351-AK5040-005...
-
Page 4: Table Of Contents
Table of Contents 1. Introduction ....................5 1.1 Package Contents ................5 1.2 Product Description ................6 1.3 Features ....................10 1.4 Specifications ..................12 2. Hardware Description .................15 2.1 Front Panel ..................15 2.1.1 LCD Monitor Indicators ..............16 2.1.2 LED Indicators ................17 2.2 Rear Panel ..................19 2.3 LCD Management ................20 2.3.1 Switch Mode ................21... -
Page 5: Introduction
1. Introduction Thank you for purchasing PLANET 8/16/24-Port 10/100TX 802.3at PoE+ SFP Ethernet Switch series, FGSD-1022VHP, FGSW-1822VHP and FGSW-2622VHP. The descriptions of these models are shown below: 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo FGSD-1022VHP Desktop Switch with LCD PoE Monitor 16-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP + 2-Port... -
Page 6: Product Description
PoE IP cameras can be saved in the NVR system to enable the administrators to control and monitor the surveillance images both in the local LAN and the remote sites. Model FGSD-1022VHP FGSW-1822VHP FGSW-2622VHP 10/100TX Copper... - Page 7 FGSD/FGSW 802.3at PoE+ Switch series equipped with 8/16/24 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces. With a total PoE power budget of up to 120/300 watts and non-blocking data switching performance, the FGSD/FGSW 802.3at PoE+ Switch series fulfills the demand of sufficient PoE power for HD IP surveillance.
- Page 8 „ Switch Port Information Main Menu 30.3 W ---M -33M ---- W ---M ---M 01 — Switch Mode ---- W ---M ---M -8.3 W ---M -11M 02 — Budget Control ----W ---M ---M ---- W ---M ---M 03 — PSE Port Priority 15.4W -10M ---M -OFF...
- Page 9 The VLAN operation mode features the port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other. VLAN Isolation Mode IP Camera Ports 1 to 16 Ports 17 and 18 for uplink IP Camera Access Denied 1000...
-
Page 10: Features
„ Up to 8/16/24 ports of IEEE 802.3af/at devices powered „ Supports PoE Power up to 30 watts for each PoE port „ Each port supports 54V DC power to PoE powered device „ 120-watt PoE budget (FGSD-1022VHP) „ 300-watt PoE budget (FGSW-1822VHP/FGSW-2622VHP) - Page 11 „ Auto detects powered device (PD) „ Circuit protection prevents power interference between ports „ Remote power feeding up to 100m in standard mode and 250m in extend mode Smart LCD „ The LCD switch features “Standard”, “VLAN” and “Extend” mode selection; the “Extend”...
-
Page 12: Specifications
1.4 Specifications Model FGSD-1022VHP FGSW-1822VHP FGSW-2622VHP Hardware Specifications 802.3af/at PoE Injector Port 10/100BASE-TX MDI/ MDIX Ports 10/100/1000BASE-T 2 (Combo) MDI/MDIX Ports 1000BASE-X SFP/ 2 (Combo) mini-GBIC Slots Switch Architecture Store-and-Forward 5.6Gbps/ 11.2Gbps/ 12.8Gbps/ Switch Fabric non-blocking non-blocking non-blocking Switch 8.3Mpps@64 9.5Mpps@64... - Page 13 Weight 1.8kg 3.4kg 3.4kg 100-240V AC, Power Requirements 100-240V AC, 50/60Hz, 5A max. 50/60Hz, 2.5A max. Power Consumption/ Max. 130 watts/ Max. 330 watts/1132 BTU Dissipation 446 BTU Thermal Fan Contact discharge of ±4KV DC Contact discharge of ±6KV DC ESD Protection Air discharge of Air discharge of ±8KV DC...
- Page 14 Environment Temperature: Temperature: -10 ~ 60 degrees C 0 ~ 50 degrees C Relative Humidity: 10 ~ 90% Relative Humidity: (non-condensing) Operating 5 ~ 90% * Temperature: < 40 degrees C; (non-condensing) Humidity: < 90% Temperature: > 40 degrees C; Humidity: <...
-
Page 15: Hardware Description
-OFF- ---M ---M 223M 246M Back Down PB:120W TP:54W PD:3 PoE-in-Use 1000 Figure 2-1: FGSD-1022VHP Switch Front Panel Switch Port Information 16-Port 10/100TX 802.3at PoE FGSW-1822VHP Menu (5 sec) 30.3 W ---M -10M ---- ---M ---M 4-Port Gigabit Ethernet Switch... -
Page 16: Lcd Monitor Indicators
„ Smart LCD The Smart LCD that is located on the front panel of the FGSD-1022VHP, FGSW- 1822VHP, FGSW-2622VHP 802.3at PoE+ Switch provides “PoE Manage- ment and Status”, “Switch Mode: Standard, VLAN, Extend”, “Budget and Bandwidth Control”, “Screen Saver”, “Fan Control”, and “Factory Default”. -
Page 17: Led Indicators
„ The detailed Smart LCD description of each item is shown below: Parameters Description 30.3W It means the output power port of the PoE switch. (example) It means the port is overloaded corresponding to the PSE, and the port stops powering. It means the port corresponding to the PSE is lightly loaded and the port stops powering (When the current on the network is less than 7.5mA, the PSE thinks the PD has been dialed out and the... - Page 18 Indicates that the Switch is actively sending or Blinks receiving data over that port. Indicates the port is successfully established at 1000 Green Lights 1000Mbps. „ 1000Mbps TP Slots (FGSD-1022VHP) Color Function Indicates the link through that port is successfully Lights established at 1000Mbps. LNK/ACT Green...
-
Page 19: Rear Panel
The rear panel of the 802.3at PoE+ Switch has an AC power socket (100-240V AC, 50/60Hz, 2.5/5A max.). 100-240V , 2.5A max. 50/60Hz Figure 2-4: FGSD-1022VHP Switch Rear Panel 100-240V , 50/60Hz, 5A max. Figure 2-5: FGSW-1822VHP/FGSW-2622VHP Switch Rear Panel „ AC Power Receptacle For compatibility with electrical outlet standard in most areas of the world, the 802.3at PoE+ Switch’s power supply automatically adjusts to line power in the... -
Page 20: Lcd Management
2.3 LCD Management The operation of the 5 buttons (Menu, Enter, Back, Up and Down) on the panel: Switch Port Information Menu (5 sec) 30.3 W ---M -33M ---- W ---M ---M ---- W ---M ---M -8.3 W ---M -11M ----W ---M ---M ----... -
Page 21: Switch Mode
This mode makes the 802.3at PoE+ Switch operate as a general (default) switch and all PoE ports operate at 10/100Mbps auto-negotiation. This mode makes This mode makes This mode makes the FGSD-1022VHP the FGSW-1822VHP the FGSW-2622VHP operate as a VLAN operate as a VLAN operate as a VLAN... - Page 22 Standard Mode (default) > Standard PoE IP Camera VLAN Extend Power FGSW-1822VHP 100 meters (328 feet) 100BASE-TX UTP with PoE VLAN Isolation Mode IP Camera Ports 1 to 16 Ports 17 and 18 for uplink IP Camera Access Denied 1000 Ports 1~16 Access Permitted Standard >...
-
Page 23: Budget Control
2.3.2 Budget Control Due to the power allocation strategy of PSE, when the residual power of PoE is too large, the power distribution of the port can be increased as much as possible by increasing the power trimming of the PSE, so that the utilization of the PSE power supply can be improved. -
Page 24: Pse Port Enable
2.3.4 PSE Port Enable Allows user to disable or enable per port PoE function. The default is “Enable”. 2.3.5 PD Type Changing the PoE power-up mode can let non-standard PDs pass the procedures of PoE power delivery process. This way, the switch can supply power to non- standard PDs. -
Page 25: Alive Check
2.3.6 Alive Check The FGSD/FGSW 802.3at PoE+ Switch series can be configured to monitor connected PD’s status in real time via traffic detection. Once there is no traffic at interval time, the FGSD/FGSW 802.3at PoE+ Switch series is going to restart PoE port power, and bring the PD back to work. -
Page 26: Bandwidth Detection
2.3.7 Bandwidth Detection When the network transmits “the highest data rate”, more than the set value, over a single port, the switch will set off an alarm to warn the overuse of the bandwidth. There are four levels of budget control, namely Unlimited (default), 70Mbps, 80Mbps and 90Mbps. -
Page 27: Language
2.3.10 Language There are two languages, namely English and Chinese. 2.3.11 Default Setting Restore the device to default. 2.3.12 System Show the system information. -
Page 28: Hardware Installation
3. Hardware Installation Start up Please refer to the following for your cabling: 10/100BASE-TX All 10/100BASE-TX ports come with Auto-Negotiation capability. They automatically support 100BASE-TX and 10BASE-T networks. Users only need to plug a working network device into one of the 10/100BASE-TX ports, and then turn on the 802.3at PoE+ Switch. -
Page 29: Desktop Installation
3.1 Desktop Installation To install the 802.3at PoE+ Switch on desktop, simply follow the following steps: Step 1: Attach the rubber feet to the recessed areas on the bottom of the 802.3at PoE+ Ethernet Switch, as shown in Figure 3-1. Men u (5 sec) Ente r... -
Page 30: Rack Mounting
3.2 Rack Mounting To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the instructions described below. Step 1: Place your 802.3at PoE+ Switch on a hard flat surface, with the front panel positioned towards your front side. Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+ Switch with supplied screws attached to the package. -
Page 31: Installing The Sfp Transceiver
3.3 Installing the SFP Transceiver The sections describe how to insert an SFP transceiver into an SFP slot of the 802.3at PoE+ Switch. The SFP transceivers are hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down the 802.3at PoE+ Switch, as the Figure 3-4 shows. - Page 32 It is recommended to use PLANET SFP on the 802.3at PoE+ Switch. If you insert an SFP transceiver that is not supported, the 802.3at PoE+ Switch will not recognize it.. Note 1. Before we connect the 802.3at PoE+ Switch to the other network device, we have to make sure both sides of the SFP transceivers are with the same media type, for example, 1000BASE-SX to 1000BASE-SX;...
-
Page 33: Product Applications
Never pull out the module without lifting up the lever of the module and turning it to a horizontal position. Directly pulling out the module could damage the module and the SFP module slot of Note the 802.3at PoE+ Switch. 3.4 Product Applications Department/Workgroup PoE Switch: Providing 8/16/24 PoE in-line power interfaces, the 802.3at PoE+ Switch can... -
Page 34: Power Over Ethernet Powered Devices
3.5 Power over Ethernet Powered Devices Voice over IP Phones As many as PoE VoIP phones, ATAs and other Ethernet/ non-Ethernet end-devices can be installed, but UPS is needed for uninterrupted power system and power control 3~5 watts system. Wireless LAN Access Points Access points can readily be installed in museums, sightseeing sites, airports, hotels, campuses, factories and warehouses. -
Page 35: Power Over Ethernet Overview
4. Power over Ethernet Overview What is PoE? PoE is an abbreviation of Power over Ethernet. The PoE technology means a system safely transmits both power and data on Ethernet UTP cable. The IEEE standard for PoE technology requires Category 5 cable or higher for high power PoE levels, but can operate with Cat3 cable for low power levels. - Page 36 intermediary device between a non-PoE capable switch and a PoE device, it is called a mid-span. An external PoE injector is a mid-span device. Powered Device A powered device (PD) is a device powered by a PSE and thus consumes energy. Examples include wireless access points, IP phones, and IP cameras.
- Page 37 The data pairs are used. Since Ethernet pairs are transformers coupled at each end, it is possible to apply DC power to the center tap of the isolated transformer without upsetting the data transfer. In this mode of operation, the pair on pins 3 and 6 and the pair on pins 1 and 2 can be of either polarity.
-
Page 38: Troubleshooting
5. Troubleshooting This chapter contains information to help you solve issues. If the 802.3at PoE+ Switch is not functioning properly, make sure the 802.3at PoE+ Switch was set up according to instructions in this manual. The Link LED is not lit. Solution: Check the cable connection and also try to swap one new cable. - Page 39 For the following equipment: *Type of Product : 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP combo Desktop Switch with LCD PoE Monitor (120 Watts) *Model Number : FGSD-1022VHP * Produced by: Manufacturer‘s Name : Planet Technology Corp. Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan...
- Page 40 EC Declaration of Conformity For the following equipment: *Type of Product : 16/24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Ethernet Switch with LCD PoE Monitor (300W) *Model Number : FGSW-1822VHP, FGSW-2622VHP * Produced by: Manufacturer‘s Name : Planet Technology Corp. Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive...
Need help?
Do you have a question about the FGSD-1022VHP and is the answer not in the manual?
Questions and answers