Dry Mode - Haier HS-08CD12 Operation Manual

Dry Mode

1. Unit start
Press ON/OFF on the remote controller, unit starts.
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
AUTO COOL
Then Select DRY operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1 C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
increase 1 C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
Air conditioner is running under displayed fan speed.
5.Unit stop
Press ON/OFF button, the unit stops.
Cautions
Unit will run intermittently in Dry mode with fan speed at "LOW",regardless of its setting.
Air blown out will be very cold at relatively low room temp.
DRY mode: When room temp. is higher than set temp. unit will in COOL mode:
When room temp. drops to set temp. compressor runs intermittently ,fan motor
will be in low speed.
Air Conditioner
DRY FAN
AUTO HI LOW
9
Edition:2006/02/07
Remote Controller
3
3
2
4
5
1