Please keep this manual in an easily accessible place for future reference. Keep HOBOT and the accessories out of reach of children. Keep HOBOT in cool and dry places, away from direct sunlight, naked flames, heat, humidity, water and any other liquids.
60°C (140°F). Store HOBOT in a dry and safe place if you won’t be using it for an extended period of time. Charge the battery every 3 months to preserve battery life.
◎Limited Warranty If there are defects in your HOBOT due to faulty materials, poor workmanship, or malfunction within the warranty period from the date of purchase or delivery, please immediately contact a local retailer or local authorized dealer for repairs or replacement.
With HOBOT App, you can now replace the default voice prompt with any sound of your choice, creating more fun and a personal touch to your robot. You can also update the firmware easily through the App to stay up-to-date with the latest features.
Page 7
◎About HOBOT-2S Vent Speaker LED indicator Start/Stop Remote receiving window Water tank lid Water tank Grips Ultrasonic nozzle Power switch DC power jack Vent 2-Caterpillar wheel 4-Edge-Leakage s ensor Cleaning cloth Suction area Hanging hole LED indicator Remote receiving window...
Page 8
◎Remote Control and App Control HOBOT can be controlled from the front and back sides with the remote control or with your smartphone via HOBOT App. Orientation Horizontal Vertical Zigzag, then N-way auto- N-way auto-clean entire clean entire window window...
(1) Connect the adapter to the DC extension cord. (2) Connect the adapter to the AC power cord. (3) Plug the L-shaped connector into DC power jack on HOBOT and screw it tight. (4) Plug the AC power cord into the socket.
Page 10
2. Charging HOBOT (1) Turn off the power and connect HOBOT to a power source. (LED Indicator turns orange while charging) (2) Make sure the battery is fully charged (Light Indicator: green) before use. 3. Attach the Cleaning Cloth Make sure the cleaning cloth is flatly attached and does not cover the 4 Edge-leakage Sensors.
The backup time of the UPS is 20 minutes. (2) HOBOT will stop automatically, flash red and blue light, and play audio alert. Please remove HOBOT from the glass as soon as possible. Please refer to FAQ Q2 for more information.
Page 12
(2) Remove the old water tank by sliding it upwards, then disconnect the cable from HOBOT. (3) Connect the new water tank to HOBOT and fix the cable along the side of the water tank. (4) Slide down the new water tank, then fasten the screws.
◎Frequently Asked Questions (FAQ) Charging UPS battery. Store HOBOT in a dry and safe place if you won’t be using it for an extended period of time. Charge the battery every 3 months to preserve battery life. If the battery cannot be fully charged (green light on) after 3 to 4 hours, please contact a local retailer or an authorized dealer for battery replacement.
Page 14
HOBOT stops at the edge of the glass, white light flashes with audio alert. Some glass sealing strips are very flat, causing air leakage to HOBOT when it rides and gets stuck on the strips. Please keep HOBOT at least 10 cm away from the window frame and use auto cleaning mode to continue.
(2) Please turn on Bluetooth function on your smartphone and connect. (3) Please check the Bluetooth device list on your smartphone and disconnect “HOBOT” to allow the App to connect to HOBOT. HOBOT does not spray water. Check if you have turned on the spray function.
Need help?
Do you have a question about the HOBOT-2S and is the answer not in the manual?
Questions and answers