⚫ Check if the safety rope is broken or the knot is loose before using the device. ⚫ The HOBOT window cleaning robots must be connected to a power outlet to operate. ⚫ For windows with no balcony, a warning area must be established on the ground below to prevent people from coming near it.
◎Limited Warranty If there are defects in your HOBOT due to faulty materials, poor workmanship, or malfunction within the warranty period from the date of purchase or delivery, please immediately contact a local retailer or local authorized dealer for repairs or replacement.
Microfiber cloth is used on both cleaning wheels to attain superior glass cleaning. HOBOT has AI Technology that can calculate paths, auto-detect window edges, and auto-clean entire window. Beside equipped remote control, HOBOT-368 can be controlled by iOS and Android devices via blue tooth connection. ◎Product Features ⚫...
Page 7
⚫ Please use HOBOT on sunny days or days with low humidity for best results. ⚫ Don't use HOBOT on rainy or high humidity days to avoid leaving water molecules streaks.
Page 8
2. Charging the Battery Make sure the battery is fully charged (green light ON) before use: (1) Turn off the power switch on HOBOT and then plug it into a power source. Orange light ON means charging. (2) Green light ON means the battery is fully charged.
Page 9
HOBOT’s moving direction. 7. Finish and Remove HOBOT from Glass (1) Hold the safety rope with one hand and grasp HOBOT tightly with the other hand to remove HOBOT off the glass. (2) Switch off HOBOT in a safe area.
Page 10
Please contact a local retailer or local authorized dealer for additional consumable spare parts. ◎Remote Control and App Control HOBOT can be remote controlled from the front and back sides. Auto Cleaning: up then down Auto Cleaning: left then down...
◎Frequently Asked Questions (FAQ) Charging UPS battery. If HOBOT is not in use for a long period of time, store it in a dry and safe location. The battery will need to be charged every 4 to 6 months to maintain battery life.
Page 12
HOBOT stops working due to power outage with long alert and red, blue light flashing. (1) Hold the safety rope with one hand and grasp HOBOT tightly with the other hand to remove HOBOT off the glass. (2) Switch off HOBOT in a safe area.
HOBOT does not move smoothly, or it moves irregularly. (1) Cleaning cloth is too dirty, please replace it. (2) The friction factor difference due to glass stickers, window film, etc. Please avoid using HOBOT on the surface with special finish.
Need help?
Do you have a question about the 368 and is the answer not in the manual?
Questions and answers