Figure 2
1
Captive screw
Slide the cover back. Lift it up and off the device.
Step 5
For proper cooling and airflow, replace the cover before turning on the device. Operating the device for
Caution
extended periods (over 30 minutes) with the cover removed might damage device components.
Step 6
Before you begin working inside the chassis, familiarize yourself with the location of the components
that you will be handling.
behind the bezel.
78-17404-01
Removing the Cover
Figure 3
shows the front of the chassis and the location of the drive bays
Installing Hard Disk Drives in the Cisco Wide Area Application Engine 611
Removing the Bezel and Cover
1
5