Page 1
INSTRUCTIONS WIDE LCD PANEL TV LT-46DS9BJ LT-42DS9BJ Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) Number : 5225, 5226 LCT2395-002A-U...
Page 3
(Business users) only valid in If you wish to dispose of this product, please visit our web page the European www.jvc-europe.com to obtain information about the take-back of Union. the product. [Other Countries outside the European Union] If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment.
Hold the TV so as not to scratch When attaching the TV to the Unplug the power cord when Take care when handling the the screen! wall, use the optional JVC going out! glossy finish! Do not touch the screen when wall mounting unit! The power buttons on For more details, see P.
To set up your TV Contents Please read “Getting started” (P. 8 - 17). Analogue terrestrial broadcasting (VHF / UHF) and analogue cable TV The main descriptions are in the following pages. Analogue channels Digital terrestrial broadcasting (DVB-T) Digital channels Connecting the PAGE PAGE...
Remote control The functions of the remote control buttons are explained as follows. Switch between digital / analogue channels. This remote control can be configured to operate up to four different devices simply by changing the remote code. “Configuring your remote control” (P. 24) Display on-screen menu.
Page 7
Display hidden information when viewing teletext on the Set the sleep timer. (P. 23) analogue channel. (P. 21) Switch between TV / Radio when watching digital channels. Note Enlarge the text when viewing teletext on the analogue For buttons that can be used to operate other devices, refer to channel.
Names and functions of parts Touch sensor panel operation Change channel. Volume Turn on / off (standby) the TV. Remote control Menu operation. sensor Power lamp Switch to an external input. (P. 21) Eco Sensor ON: Lit Switch between digital / analogue channels. (P. 21) g“What is “Eco Sensor”?”...
Page 9
Attach the stand to the TV When attaching the TV to the wall Seal up the two holes at the bottom of the TV using the plates provided. Peel off the protection films on the plates. Then peel the plates from the paper and stick them on the holes.
Connect the power cord only to a 220 - 240 V, 50 Hz AC outlet. (Conditional Access Module) (A) in addition to the When attaching the TV to the wall, use the optional JVC wall mounting unit Viewing Card. Consult a qualified technician.
Page 11
Connecting your external devices Note Make sure all the devices and the TV are turned off. The names of the devices shown in the following illustration are examples. Please read the user manuals of each device before setting up. The alphabets A, B, C, D, E, F and G indicate the type of connections. Refer Connecting cables are not supplied with this TV.
Getting started Choose your best connection Please do not change any of the menu settings before completing the “Initial You can connect your TV to other devices in different ways. Check your settings” (P. 13). Otherwise, the “Initial settings” will not start automatically. devices and choose the best connection.
Page 13
Input Composite video (analogue) RGB input (analogue) EXT-1 Audio L / R (analogue) Output Analogue TV out (composite video and audio L/R) (analogue) Input If you want to input the SCART Composite video (analogue) S-Video signal, change (Euroconnector) S-Video (analogue) the “Ext Setting”.
Page 14
Getting started Connecting the aerial Power supply for the indoor aerial Connect the aerial When using an indoor aerial which requires external power, set “Antenna Power” to “On” in step of “Initial settings” (P. 13). The TV will supply DC 5V, 50mA (max) from the aerial socket through the cable to the aerial.
Page 15
Select Navigate Select Scan completed! Store services? If the JVC logo does not appear, refer to “To perform initial settings again” (P. 14). Set digital channels If “No services found” appears, press the “OK” button to 1 Confirm “English” is set for on-screen displays and DTV proceed to the next step to complete the other settings.
Page 16
Getting started Set analogue channels If you wish to make changes later, refer to “Service Scan” (P. 14) on the separate manual “WATCHING DIGITAL CHANNELS” for digital channel 1 Register analogue channels settings, or “Language” (P. 30) and “Auto Program” (P. 30) on this manual Auto Program for analogue channel settings.
Page 17
Editing analogue channels Move Move a channel’s position (PR) You can edit the analogue channel list. select Switch to analogue channels TV/DTV Edit a channel name (ID) Display the “Edit” menu Naming a channel Display the menu bar Select “Set Up” Select “Edit/Manual”...
Getting started Manual Register a new channel To edit digital channels WATCHING DIGITAL CHANNELS P. 9 Manual To register a digital channel manually _ _ _ _ _ _ BBC1 BBC2 WATCHING DIGITAL CHANNELS “Service Scan” (P. 14) _ _ _ _ _ _ A Search a channel Fine tune B Set Press the red or green button.
“CH/CC” list To use the “Insert” function (P. 15), find the “CH/CC” number corresponding to the TV’s Channel number from this table. If you want to know a particular TV channel’s menu, look in TV listings magazines or contact the broadcaster. When the Country setting is “United Kingdom”, the CC number channels and channels from CH 02 to Ch 12 cannot be received.
Watching analogue channels Mute Note Turn on To soften the picture for daily use, change the setting in The power lamp on the TV lights. “Picture Mode” “Picture Mode” (P. 26) Channel information and clock If the remote control doesn’t work, confirm that the mode is set to “TV”.
Viewing teletext on the analogue channel F.T/L This TV can display TV broadcasts and teletext on the same analogue Bookmark your favourite page channel in two windows. Display your favourites list Switch to analogue When watching channels analogue channel TV/DTV Select a coloured button to save your page to TEXT (red) (green) (yellow) (blue)
Watching videos / DVDs Hold the current page Select the video source Hold the current page Release Press “ ” again Ext Mode A select Ext Mode EXT-1 Reveal hidden pages EXT-2 B watch EXT-3 HDMI1 Display hidden information (answers to quizzes, etc.) HDMI2 HDMI3 7 DTV...
Useful functions Zoom 3D Cinema Sound Change the aspect ratio Enjoy ambient sound Select the aspect ratio 3D Cinema Sound A select Zoom Auto You can adjust the “3D Cinema Sound” settings in the “3D Regular Cinema Sound” menu. (P. 28) Panoramic 14:9 Zoom “3D Cinema Sound”...
Page 25
Stereo/t-u Sleep Timer Change the sound mode or language (analogue channels) Set a time for the TV to turn off automatically Select the sound mode or language Set the time Sound Sleep Timer A select A select Bass Treble Balance Hyper Sound B set 3D Cinema Sound...
Configuring your remote control You can configure your TV’s remote control to operate your other Note devices. If your device does not respond, try all the available codes for the device’s brand. Configure your remote control. If none of the code works, or the brand is not listed, refer to “Using the search code function”...
Page 27
Button functions Using the search code function Change the remote control mode This function searches through the codes one by one, beginning from the first code in the list. Turn on the device manually. Turn on/off the device Switch the remote control mode to a mode that matches Navigate the menus your device.
Customising your TV Display the menu bar Picture Picture Picture Mode Standard Display the desired menu Backlight Contrast Brightness select Sharpness Picture Colour Colour Temp. Normal Features Picture Mode DTV menu WATCHING DIGITAL CHANNELS You can select a preset picture setting according to the P.
Features (sub menu) MPEG Noise Reduce MPEG video noise (On / Off) Reduction Features Digital VNR Colour System When there is no colour, change the colour DigiPure Movie Theatre Auto Note system Colour Management Picture Management “Smart Picture” is not available when Smart Picture Dynamic Backlight : Western Europe (excluding...
Features Blue Back Displays a blue screen and mutes the sound when the signal is weak or absent (On / Off) (analogue channels) Features Sleep Timer Child Lock Blue Back Favourite Setting Remove a channel from the Favourite Favourite Setting Power Lamp channel list (analogue channels) Eco Sensor...
Customising your TV Set Up Edit/Manual “Editing analogue channels” (P. 15) Language Set Up Select a language for the menus (excluding Auto Program DTV menus) Edit / Manual Language Ext Setting HDMI-1 Audio Setting Auto Language Attenuator English Polski Français Deutsch Magyar Italiano...
Page 33
Setting external terminals S-In Switch to S-Video input “ ” mark will appear at the selected (yellow) Display the “Ext Setting” menu “EXT”. The device selection display will change Display the menu Select “Set Up” Select “Ext Setting” from “E2” to “S2”. A select A select Cancel this mode...
Troubleshooting For problems Problem Actions Analogue channels concerning digital Severe noise or snow channels Is the TV WATCHING Remote control stops Unplug TV, several minutes later plug it in connected DIGITAL working again. correctly to the CHANNELS aerial? P. 16 - 17 Change the direction of the Aspect ratio changes...
Page 35
Problem Actions Problem Actions Adjust “Bass” and “Treble”. (P. 28) Wait a little for the signal to stabilize when Green and distorted Poor sound If receiving a poor signal in “Stereo/t-u”, switching the signal format for an HDMI screen switch to “v” (monaural). (P. 23) device.
Technical information Make sure not to block the Eco Sensor on front of the TV (P. 6) What is “ACI” (Automatic Channel Installation)? To fully reduce eyestrain and the power consumption of this TV. Set to the following functions. Some cable companies transmit a signal called “ACI” which contains Eco Sensor: On or Demo (P.
Specifications Model LT-46DS9BJ LT-42DS9BJ Broadcasting systems CCIR I Colour systems TV broadcast: PAL External input: PAL, NTSC 3.58/4.43 MHz Channels and frequencies Digital: E21-E68 (Frequency: 470-854 MHz)* Analogue: UNITED KINGDOM: E21-E69 (UHF) IRELAND: IR A-IR J, E2-E12, E21-E69 (VHF/UHF) Sound-multiplex systems...
Page 38
Remote control codes (P. 24) Cable Set Top Box 1230, 1269 Freebox 1482, 1976 Noos 0817 Scientific Atlanta 0477 Auna 1230 General Instrument 0276 0276, 1060, 1068 StarHub 0276 Austar 0276 HyperVision 0619 1068 Supercable 0276 Jerrold 0276 Optus 0276 Tele Danmark 0619 Birmingham Cable...