Table of Contents
Advertisement
USER GUIDE //
EVACUATION CHAIR PS-251
Review 2021/07
03
OPERATION
03.1
Transport and storage
Before transporting the appliance, make sure that it is correctly packa-
ged. During transport always fix the load. If piling up is necessary always
follow the scheme shown on figure 1. Transport the leveled load and fo-
llowing all precepts and rules for the transport of loads, ensuring also
that there are no risks of shocks, bumps or falls during the transport itself.
To unpack the device place the box on a flat, stable surface and carefully
open the seal. Remove the device from the inside of the box following
the scheme shown on figure 2.
Keep the original packaging for use in case of any further transport and
for storage.
Damage to the appliance caused during transport and handling is not
covered by the guarantee. Repairs or replacement of the damaged parts
are the responsibility of the client.
The device must be stored in a dry, cool area away from direct sunlight.
It must not be placed in contact with any substances or chemical agents
which could cause damage and reduce safety characteristics.
03.2
Preparation
On receipt of the product:
- Remove the packaging and display the material so that all components are visible.
- Check that all the components/pieces on the accompanying list are present.
The appliance must be checked before every use so as to reveal any working abnormalities and/or damage
caused by transport and/or storage. In particular, check:
- General functionality of the device
- Cleaning the device (remember that the lack of cleaning can cause the spread of infections)
- Absence of cuts, holes, breaks in the structure, including the belts
- Correct fixing of all nuts, bolts and screws
- Correct attachment of the belts to the chair
- Correct operation of the belt closure
- Condition of moving parts, wheels and belts
- Integrity of the seams
- There are no tubes or metal sheets that show bends or cracks.
- The backrest and the seat do not show damage or structural cracks
- The welds are intact, without cracks or breaks.
- Wheels are securely fixed, stable and work properly.
- Wheels are free of dirt or debris
- Brakes work properly
- Track belts run and have the correct tension for use
- Correct operation of the springs
- Armrests raise and lower correctly
- The transport handles open, close and lock correctly.
- Telescopic handles open, close and lock properly
- Presence of all labeling
- Lubrication of moving parts
- The emergency vehicle is equipped with the locking system for the PS-350 chair
If the above conditions are met, the device may be considered ready for use; otherwise you must immedia-
tely remove the device from service and contact the manufacturer.
14
UNIDAD DE EMBALAJE
RESPETE LA POSICIÓN DE TRANSPORTE DEL EMBALAJE
FIGURE 1
DESEMBALAJE DEL PRODUCTO
UNTILIZAR SIEMPRE BASE PLANA DE APOYO
FIGURE 2
Advertisement
Table of Contents
