Specific Warnings - Promeba PS-251 User Manual

USER GUIDE // EVACUATION CHAIR PS-251
Review 2021/07
01
INTRODUCTION
28. As a distributor or end user of the products manufactured and/or distributed by Promeba, S.L., you are
strictly obliged to know the legal provisions in force in the country of destination of the goods, applicable
to the devices to be supplied (including the regulations relating to technical specifications and/or safety re-
quirements) and, therefore, understand the necessary requirements to ensure compliance of the products
themselves with all the legal requirements of the territory.
29. Promptly notify PROMEBA regarding any revisions to be made by manufacturer in order to guarantee
the conformity of the product to the territory's legal specifications (including those resulting from rules
and/or norms of other nature).
30. Act with all due care and diligence, and contribute to ensure conformity to general safety requirements
of all devices marketed in the territory, by providing final users with all necessary information for carrying
out periodical checks on their devices, as specified in the relevant user manual.
31. Actively contribute to product safety checks on products sold, by communicating any relevant risk
analysis information both to the manufacturer and to any competent authorities so that the necessary ac-
tions can be promptly taken.
32. Be aware that in the event of any failure to conform to the above mentioned requirements you will be
deemed fully responsible for all damages that might occur. Therefore we expressly disclaim any responsibi-
lity and/or liability for your non-compliance with the present "Regulatory provisions".

01.10 Specific warnings

1. Establish a maintenance program and periodic testing, identifying a reference employee. The person to
whom the ordinary maintenance of the device is entrusted must ensure the basic requirements foreseen by
the manufacturer in the user's manual.
2. Use only accessories/spare parts that are original or approved by Promeba, S.L. when carrying out any
operation, to avoid causing any alteration or modification to the device, otherwise we assume no responsi-
bility for the proper functioning or damage resulting from device to the patient or the operator and warran-
ty will be considered void.
3. Always respect the maximum capacity of the device, as indicated in this user's manual. Maximum load
capacity means the total weight distributed according to the human anatomy. In determining the load of
the total weight on the product, the operator must consider the weight of the patient, the equipment and
the accessories. Moreover, the operator must consider that the overall dimensions of the patient do not
reduce the functionality of the device.
4. Never leave the patient unassisted on the device, because he may be injured.
5. Do not use bleach to disinfect the product. Use a hydroalcoholic based disinfectant and wash with water.
6. The device and all its components, after washing, should be allowed to dry completely before storing.
7. Do not wash the product in a washing machine or dry it in a dryer machine.
8. Lubrication must be carried out after cleaning and complete drying.
9. Follow procedures approved by Emergency Medical Services for immobilization and transportation of
the patient.
8