Table of Contents
Advertisement
USER GUIDE //
CHAIR PS-250 + POWER TRACK PA-260 + LOCKING SYSTEM PA-270
Review 01/17
03
OPERATION
03.4
Engaging and disengaging operation of track system
PS-250 + PA-260
First, place the track in an extended position, reclining on the tread
bands as shown in fi gure 1.
With the chair unfolded, bring the lower hooks of the chair closer
to the track, so that they are aligned with the track anchors, slightly
lifting the chair attach the lower anchors as shown in fi gure 2.
Then, turn the chair on the power track, with a dry blow, you should
hear a CLACK sound and the coupling will have been produced co-
rrectly, see image 3.
To end, lift the assembly and close the track so that the assembly is
according to the image 4.
For the decoupling process, pull the cable located at the top of the
track and it will be released.
DURING THE OPERATION OF THE COUPLING AND DISCOUPLING OF THE TRACK, THE CHAIR SHALL
REMAIN AT ALL TIMES WITHOUT ANY PATIENT AND ON A SURFACE AS FLAT AS POSSIBLE.
IF NOT, BOTH THE PATIENT AND PERSONNEL MAY RESULT IN WOUNDS AND MAY RESULT IN DA-
MAGED IMPORTANT PRODUCT ELEMENTS.
1
2
1
2
3
4
1
2
"CLACK"
17
Advertisement
Table of Contents
